Gloucestershire · England
Bath Re-enamelling for Andoversford homes
Fixed-price bath re-enamelling in Andoversford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that will not shift
How we handle bath re-enamelling in Andoversford
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are frequently asked to fix staining under the taps and around the waste and an old resurfacing that’s failing, in pressed steel baths, cast iron baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Andoversford (GL54)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
FAQs for Andoversford
Do you cover Andoversford?
Yes. We cover the whole UK and travel to Andoversford. Send pictures and we will quote, or call 0345 017 0787.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Repairing versus replacing in Andoversford
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- Every repair guaranteed for a year
- No need to remove anything
- Colour-matched on site
- We come to you, anywhere in the UK
See our full price list or guide to resurfacing and replacement costs.
Towns and villages near Andoversford
What else we do in Andoversford
What we are called out for in Andoversford
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Common reasons people in Andoversford contact us are:
- Wear marks under the taps
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- An old resurfacing that is failing
Questions to ask before you book
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- How soon you can use it again
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- The size and number of damaged areas
- The material and finish
- How many items we do on one visit
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- A clear, close picture of the problem area
- Any details about the material
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away whether it can be repaired.
What we can’t put right
A repair isn’t right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Andoversford and nearby
Andoversford is about 5 miles east of Cheltenham, in Gloucestershire. Jobs in Andoversford are booked in like any other job: a fixed quote from photos, then a visit to do the work. Andoversford is one of 470 places in Gloucestershire we cover. We work right across the region, from Andoversford to Birmingham (41 miles away).
Our visits in GL54 work the same way as everywhere else we cover. Whether you live on Station Road, Jubilee Mews and Huntsmans Meet or anywhere nearby, we can come to you. Neighbouring places we cover include Shipton Solars (1 mile south-east), Shipton (1 mile south-east), Withington (3 miles south), Charlton Kings (3 miles west) and Battledown (3 miles west). We also work in nearby towns such as Cheltenham (5 miles west), Gloucester (11 miles west), Stroud (14 miles south-west), Tewkesbury (11 miles north-west), St Paul's (5 miles west) and Cirencester (11 miles south).
Local landmarks in Andoversford
Around Andoversford, we work in homes near The Royal Oak pub, Church of St Bartholomew and Andoversford Primary School. Further afield, we also cover the area around Sudeley Castle (5 miles north) and Cheltenham General Hospital (4.6 miles west).
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Looking after it afterwards
So the finish stays in good condition for years:
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
