Cumbria · England
Bath Re-enamelling for Angerton homes
Full bath re-enamelling and resurfacing for homes and businesses in Angerton and across Cumbria. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
Angerton and the surrounding area
Angerton is about 11 miles west of Carlisle, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 438 places in Cumbria. Our jobs stretch from Angerton to Newcastle upon Tyne (62 miles away).
Every address in CA7 is covered, from the main roads to the quietest streets. From Church Road and Birch Hill Lane or anywhere nearby, a technician can come to you. We also cover the places around Angerton: Kirkbride (1 mile south), Anthorn (2 miles north-west), Glasson (2 miles north-east), Newton Arlosh (2 miles south-west) and Port Carlisle (3 miles north). Larger places within reach include Carlisle (11 miles east), Currock (11 miles east), Raffles (9 miles east), Botcherby (11 miles east), Morton (10 miles east) and Wigton (6 miles south).
Around Angerton
In Angerton, that means homes near Kirkbride Primary School and Church of St Bride, among other places. Other landmarks nearby include Drumburgh Castle (2.7 miles north-east). The countryside around Angerton includes Campfield Marsh RSPB reserve.
About our bath re-enamelling in Angerton
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
All our work is covered by a one-year guarantee.
- Location
- Angerton (CA7)
- Region
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
So the finish stays in good condition for years:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Angerton customers choose us
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Everything repaired in place
Take a look at our pricing or bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Angerton. What changes the price is:
- What kind of damage it is
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Details of any past repairs
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Landlord and trade work in Angerton
For anyone letting property in or around Angerton, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Questions from Angerton
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How much does bath re-enamelling cost in Angerton?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Places near Angerton
Other services in Angerton
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
The process
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes most of the day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Point us to the nearest place to park
- Make sure the area is dry
- Keep children and pets away from the room on the day
Get a quote
To get a price, send a couple of photos through our quote form or call us. We will say immediately if a repair is the right fix.
Advice
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
