Cumbria · England
Bath re-enamelling & resurfacing in Morton, Cumbria
Full bath re-enamelling and resurfacing at your home in Morton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Landlords, agents and businesses in Morton
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Bath re-enamelling in Morton without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s stains that won’t shift and enamel that’s lost its shine and feels rough, we can help, on pressed steel baths, acrylic baths and basins & shower trays alike.
A one-year guarantee comes as standard.
- Area
- Morton (CA2)
- County
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Signs you need bath re-enamelling in Morton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for any of the following:
- An old resurfacing that is failing
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Worn patches where water runs and sits
What your quote should include
- Aftercare advice
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- A fixed price, and whether VAT is included
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the area is dry
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
About Morton
Morton is about 1 mile south-west of Carlisle, in Cumbria. Whether you are in the middle of Morton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Morton is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 53 miles away.
Our technicians cover all of CA2. Whether you live on Park Road, Percy Road and Suttle Lane or a nearby road, a technician can come to you. Being close to the A595, Morton is easy for our repair technicians to reach. We also cover the places around Morton: Raffles (1 mile north), Cummersdale (1 mile south), Belle Vue (1 mile north-west), Carlisle (1 mile north-east) and Currock (1 mile east). Larger places within reach include Wigton (9 miles south-west), Brampton (10 miles north-east), Longtown (9 miles north), Dalston (3 miles south), Scotby (4 miles east) and Wetheral (5 miles east).
Local landmarks in Morton
Typical jobs here are in homes near Church of Jesus Christ of Latter Day Saints, Newlaithes Junior School and The Royal Scot pub and the streets around them. The closest station to Morton is Carlisle station, roughly 1.3 miles north-east. Further afield, we also cover the area around Carlisle Castle (1.3 miles north-east) and County Borough of Carlisle (1.4 miles north-east). For a walk, there is Thurstonfield Lough.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We look at:
- The material and finish
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Our prices are the same across the UK, so there is no premium for Morton. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- What it’s made of, if you know
- Your postcode, so we can check dates
- Natural light rather than flash
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Morton: your questions answered
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What else we do in Morton
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
