West Sussex · England
Bath re-enamelling & resurfacing in Angmering-on-Sea, West Sussex
Our repair technicians come to Angmering-on-Sea for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
Do you need bath re-enamelling in Angmering-on-Sea?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People normally call us after spotting one of these:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- An outdated colour you’d like to change
What your quote should include
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
Bath re-enamelling in Angmering-on-Sea, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and people most frequently call us about chips and rust in more than one place and a period or roll-top bath worth keeping.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Location
- Angmering-on-Sea (BN16)
- Area hub
- West Sussex
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Angmering-on-Sea
More services for Angmering-on-Sea
How to look after the repair
Simple care helps the repair last. Our advice:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Covering Angmering-on-Sea
Angmering-on-Sea is about 1 mile south-east of Rustington, in West Sussex. Wherever you are in the BN16 postcode area, a technician comes to you. Our repair technicians cover all 371 towns and villages across West Sussex, from the larger towns to small villages. You can also see our page for London, about 51 miles away.
We work across BN16 and the streets around it. We regularly work on streets such as Sea Lane, Sea Road and Manor Road. Nearby, we also work in West Kingston (1 mile east), East Preston (1 mile north), Kingston Gorse (1 mile east), West Preston (1 mile north-west) and Ferring (1 mile east). Larger places within reach include Worthing (4 miles east), Bognor Regis (9 miles west), Chichester (13 miles west), Selsey (14 miles west), Shoreham-by-Sea (9 miles east) and Lancing (7 miles east).
Landmarks near Angmering-on-Sea
Locally, our jobs take us to homes close to East Preston Infant School, The Parish Church of St Mary and The Angmering School. The closest station to Angmering-on-Sea is Angmering station, about 1 mile north-west. Nearby you will also find Rustington Museum (1.2 miles west) and Zachary Merton Hospital (1.1 miles west). The countryside around Angmering-on-Sea includes Highdown Hill.
What a repair can’t fix
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Make sure the room can be ventilated
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Dust sheets down, tidy finish
Take a look at our prices page or bath cost comparison.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
You can usually get a fixed price without us visiting. To make it quick:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A picture taken from further back
- Daylight if possible, and no flash reflection
Send us photos of the damage and one of the entire item, with your BN16 postcode, and we will reply with a fixed price.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Your questions about bath re-enamelling in Angmering-on-Sea
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your BN16 postcode.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
About our accreditations · Every repair comes with a one-year guarantee.
