West Sussex · England
Bath Re-enamelling in Kingston Gorse
Problem with your bath in Kingston Gorse? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A period or roll-top bath worth keeping
About our bath re-enamelling in Kingston Gorse
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for thin, worn enamel in places and a bath that stays dull however much you clean it, across cast iron baths, acrylic baths and pressed steel baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Kingston Gorse (BN16)
- County
- West Sussex
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Kingston Gorse
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
The most common problems we’re called about are:
- A coating lifting around the plughole
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- How the room is protected while they work
Landlords, agents and businesses in Kingston Gorse
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. We can’t fix:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Kingston Gorse
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Kingston Gorse and nearby
Kingston Gorse is about 3 miles south-west of Worthing, in West Sussex. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 371 places across West Sussex, from the larger towns to small villages. Our jobs stretch from Kingston Gorse to London (about 51 miles away).
All of BN16 is covered. Streets in the area include Middle Way, Gorse Avenue and Sea Lane, all of which we cover. We also cover the places around Kingston Gorse: West Kingston (1 mile west), Ferring (1 mile north-east), Angmering-on-Sea (1 mile west), East Preston (1 mile north-west) and Hangleton (1 mile north). We also work in nearby towns such as Worthing (3 miles north-east), Bognor Regis (10 miles west), Chichester (14 miles west), Selsey (15 miles west), Littlehampton (3 miles west) and Shoreham-by-Sea (9 miles east).
Near you in Kingston Gorse
We visit homes around Chatsmore Catholic High School, St Andrew's Church and Ferring CofE Primary School. The closest station to Kingston Gorse is Goring-By-Sea station, roughly 1.5 miles north-east. Well-known places in the area include Zachary Merton Hospital (1.8 miles west) and Rustington Museum (2 miles west). Open spaces near Kingston Gorse include Highdown Hill.
Should you replace it?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- One visit for most repairs
- We leave the room as we found it
- A fixed quote before booking
- No extra charge for your area
Take a look at our prices page or guide to resurfacing and replacement costs.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
If you’re in Kingston Gorse and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Nearby places to Kingston Gorse
What else we do in Kingston Gorse
Kingston Gorse: your questions answered
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Are there extra charges for Kingston Gorse?
No. Our quotes include travel, with the same prices everywhere we work.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
What affects the price in Kingston Gorse
Resurfacing from £350. We do not charge extra for travel to Kingston Gorse. The price comes down to:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
You can take the photos on your phone. Ensure they show:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Details of any past repairs
- Natural light rather than flash
Upload a photo of the damage and one of the entire item, with your BN16 postcode, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
