North Lincolnshire · England

Bath re-enamelling & resurfacing in Appleby, North Lincolnshire

Bath re-enamelling across Appleby and nearby, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Appleby

Should you replace it?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

Why book with us

  • Nothing taken out or refitted
  • Fixed prices from your pictures
  • Same prices wherever you are
  • Colours mixed by hand to suit your surface

Read our prices page and resurfacing vs replacement cost guide.

Bath re-enamelling at your home in Appleby

We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Whether it’s several chips and rust patches and wear marks under the taps, we can usually put it right.

Whatever the size of the job, it’s backed by a one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Appleby (DN15)
County
North Lincolnshire
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Landlords, agents and businesses in Appleby

For anyone letting property in or around Appleby, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

FAQs for Appleby

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Can you change the colour of my bath?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

What happens on the day

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow the best part of a day, and we will keep you posted as we go.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing
  • Keep children and pets away from the room on the day

Getting a price

For a price in Appleby, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

How to care for the repair

After the repair has cured, a few habits help it last:

  • Rinse off hair dye, oils and bath bombs immediately
  • Keep toiletries on a shelf rather than in the bath
  • Repair dripping taps early
  • Wipe the bath dry after use in hard water areas

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair cannot fix:

  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath
  • Steel that has corroded right through

Send us pictures and we will tell you honestly before you book.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops

Common problems we fix in Appleby

Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.

The most common problems we are called about are:

  • Worn patches where water runs and sits
  • A peeling or bubbling previous coating
  • Stains that won’t shift
  • Enamel that is lost its shine and feels rough

Before you book anyone

  • How your room will be protected
  • What aftercare is recommended
  • When it can be used again
  • A fixed quote, and whether VAT is included

Choosing a repair company

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

Appleby and nearby

Appleby is about 5 miles north-east of Scunthorpe, in North Lincolnshire. Jobs in Appleby are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Appleby is one of 90 towns and villages in North Lincolnshire we cover. You can also see our page for Leeds, about 42 miles away.

Postcode districts we cover here: DN15. From Paul Lane, Church Lane and Haytons Lane or anywhere nearby, we can come to you. We also travel to Low Risby (1 mile west), Saxby All Saints (3 miles north-east), Horkstow (3 miles north-east), Ferriby Sluice (4 miles north-east) and South Ferriby (4 miles north-east). Further out, we also cover Scunthorpe (5 miles south-west), Barton-upon-Humber (7 miles north-east), Bottesford (7 miles south-west), Brigg (6 miles south-east), Frodingham (4 miles south-west) and Crosby (4 miles south-west).

Near you in Appleby

Typical jobs here are in homes near Church of St Bartholomew and the streets around them. For rail, the closest station is Scunthorpe station, about 4.4 miles south-west of the centre. Other landmarks nearby include Scunthorpe General Hospital (4.9 miles south-west) and Broughton Castlethorpe (5 miles south-east).

Map of Appleby © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.