North Lincolnshire · England
Bath re-enamelling & resurfacing in Ferriby Sluice, North Lincolnshire
Bath re-enamelling in and around Ferriby Sluice: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in Ferriby Sluice
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you’re dealing with a peeling or bubbling previous coating and an original cast iron bath that needs restoring, we can normally put it right, on Victorian roll-tops, basins & shower trays and pressed steel baths alike.
All our work comes with a one-year guarantee.
- Area
- Ferriby Sluice (DN18)
- County
- North Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Ferriby Sluice
Ferriby Sluice is about 9 miles south-west of Kingston upon Hull, in North Lincolnshire. Across the DN18 area, we come to you. Ferriby Sluice is one of 90 places in North Lincolnshire where we work. Our nearest city page is Leeds, about 43 miles away.
Our technicians cover all of DN18 and the streets around it. Whether you live on Andrews Road and Sluice Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include South Ferriby (1 mile east), Horkstow (2 miles south), Saxby All Saints (3 miles south), Winteringham (3 miles west) and Appleby (4 miles south-west). Further out, we also cover Scunthorpe (9 miles south-west), Barton-upon-Humber (3 miles east), Bottesford (11 miles south-west), Brigg (9 miles south), Frodingham (8 miles south-west) and Crosby (8 miles south-west).
Near you in Ferriby Sluice
Typical jobs here are in homes near Church of Saint Nicholas, Hope & Anchor pub and South Ferriby Primary School, among other places. The closest station to Ferriby Sluice is Ferriby station, about 2.8 miles north. Further afield, we also cover the area around Hull and East Riding Hospital (5.5 miles north-east) and Barton upon Humber Castle (3.2 miles east). The countryside around Ferriby Sluice includes Far Ings National Nature Reserve.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Repair dripping taps early
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It typically takes a full day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
- Keep pets and children out of the room while we work
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
Your questions about bath re-enamelling in Ferriby Sluice
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Do you work in Ferriby Sluice?
Yes. We work across the UK and come to Ferriby Sluice. Send pictures and we will quote, or call 0345 017 0787.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Repair or replace in Ferriby Sluice?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Dust sheets down, tidy finish
- A year’s guarantee on all work
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Ferriby Sluice
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How hard the colour is to match
- What kind of damage it is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your photos
Two or three clear photos are normally enough. Try to include:
- Natural light rather than flash
- Any details about the material
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
What we can’t put right
Some jobs are not right for a repair, including:
- Holes rusted through the metal
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Nearby places to Ferriby Sluice
Other services in Ferriby Sluice
About our accreditations · Every repair comes with a one-year guarantee.
