North Yorkshire · England
Bath re-enamelling & resurfacing in Appleton Wiske, North Yorkshire
Damaged bath in Appleton Wiske? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Bath re-enamelling at your home in Appleton Wiske
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people contact us are worn patches where water runs and sits and several chips and rust patches.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Appleton Wiske (DL6)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in North Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Nearby places to Appleton Wiske
Also in Appleton Wiske
Covering Appleton Wiske
Appleton Wiske is about 5 miles south-west of Yarm, in North Yorkshire. Clients in Appleton Wiske get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Appleton Wiske is one of 626 places in North Yorkshire we cover. We work right across the region, from Appleton Wiske to Newcastle upon Tyne (39 miles away).
Every address in DL6 is within our area, from the main roads to the quietest streets. You’ll find streets such as Prospect View, Baker Street and Hornby Road. Nearby, we also work in West Rounton (2 miles south-east), Welbury (2 miles south), Low Worsall (3 miles north), Kirklevington (4 miles north-east) and Ingleby Arncliffe (4 miles south-east). Within a short drive, we also cover Catterick Garrison (13 miles west), Northallerton (7 miles south), Richmond (14 miles west), Thirsk (14 miles south), Colburn (12 miles west) and Stokesley (9 miles east).
What’s near Appleton Wiske
Our customers here include homes close to Appleton Wiske Community Primary School, Church of St Mary and The Lord Nelson Inn, among other places. The closest station to Appleton Wiske is Yarm station, roughly 4.4 miles north-east of the centre. A little further out are Harlsey Castle (4.5 miles south).
When to call us in Appleton Wiske
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Stains that will not shift
Comparing quotes
- What protection goes down before work starts
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- How changes to the job are handled
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Let us know about parking or access
How to get a price
Most customers in Appleton Wiske get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Appleton Wiske questions
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Repair or replace in Appleton Wiske?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Appleton Wiske clients choose us
- Colour mixed on the day to match
- Work done at your home or business
- One price list for the whole UK
- Usually one visit, start to finish
See our pricing and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Appleton Wiske. The price reflects:
- Access to the area
- The material and finish
- How many areas need work
- Doing more than one item at once
The price reflects the work involved, not your postcode. You will see the full price before booking.
Quotes from your photos
Phone photos are fine. Just make sure we can see:
- One picture of the whole bath
- Details of any past repairs
- Natural light rather than flash
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
