Stockton-on-Tees · England
Bath re-enamelling & resurfacing in Yarm, Stockton-on-Tees
Local bath re-enamelling for Yarm: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
About our bath re-enamelling in Yarm
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair cast iron baths, acrylic baths and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Yarm (TS15)
- County
- Stockton-on-Tees
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Places near Yarm
Also in Yarm
Common questions in Yarm
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Yarm and the surrounding area
Yarm is about 5 miles south of Stockton-on-Tees, in Stockton-on-Tees. Our repair technicians come to homes and businesses in Yarm, so there’s no workshop to go to. Yarm is one of 31 towns and villages in Stockton-on-Tees where we work. You can also see our page for Newcastle upon Tyne, about 36 miles away.
All of TS15 is within our area. Whether you live on The Old Market, High Street and Penwick Walk or a nearby road, we can come to you. Being close to the A67 and A1044, Yarm is simple for us to get to. Nearby, we also work in Kirklevington (1 mile south-east), Low Worsall (2 miles south-west), Appleton Wiske (5 miles south-west), West Rounton (5 miles south) and Welbury (6 miles south). Larger places within reach include Stockton-on-Tees (5 miles north), Billingham (8 miles north), Thornaby-on-Tees (4 miles north-east), Elm Tree Farm (5 miles north), Fairfield (5 miles north) and Wynyard (10 miles north). Yarm is among the bigger towns we cover in Stockton-on-Tees.
Local landmarks in Yarm
We visit homes around The Green Tree Public House, Yarm County Primary School and Conyers School, among other places. Nearby too are Yarm School (0.6 miles north) and St Mary Magdalene (0.8 miles north). Yarm has its own railway station: Yarm station. Other landmarks nearby include Yarm Castle (0.6 miles north) and Carter Bequest Primary Care Hospital (5.7 miles north-east).
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes the best part of a day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
How to get a price
Send us a photo of the damage and a wider shot of the entire item, with your TS15 postcode, and we will reply with a fixed price.
Related advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs immediately
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Yarm. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Everything repaired in place
- Colour-matched on site
Take a look at our prices page and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The type of damage
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- The postcode, so we can plan the visit
- The material, if you know it
- Details of any past repairs
- A coin or ruler next to the damage for scale
For a price in Yarm, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
