Shropshire · England
Bath re-enamelling & resurfacing in Arowry, Shropshire
Full bath re-enamelling and resurfacing at your home in Arowry, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that is failing
- Worn patches where water runs and sits
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Arowry. What changes the price is:
- The type of damage
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How many areas need work
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from pictures
You can generally get a fixed quote without us visiting. To help us price it:
- Any details about the material
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- One picture of the entire bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
How we handle bath re-enamelling in Arowry
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with an old resurfacing that’s failing and lots of chips and rust spots, we can typically put it right, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Arowry (SY13)
- Region
- Shropshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What we are called out for in Arowry
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Keep an eye out for any of the following:
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Questions to ask before booking
- How soon you can use it again
- How long the guarantee is and what it covers
- How to look after the finish
- Whether a trained technician does the job
What happens on the day
We agree an arrival time beforehand. Once we are there, the work takes most of the day in most cases. We leave the room clean and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know about parking or access
- Open a window if you can
- Let us know which floor the room is on
Getting a price
Upload pictures of the damage and one of the whole item, with your SY13 postcode, and we will reply with a fixed price.
Advice
What we can’t put right
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Arowry: your questions answered
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
How do I get a price for bath re-enamelling in Arowry?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SY13 postcode.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Everything repaired in place
- Colours mixed by hand to suit your surface
See our prices page and guide to resurfacing and replacement costs.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Our work in Arowry
Arowry is about 5 miles west of Whitchurch, in Shropshire. Whether you’re in the middle of Arowry or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 433 towns and villages in Shropshire, from the larger towns to small villages. We work right across the region, from Arowry to Liverpool (32 miles away).
Our technicians cover all of the SY13 postcode area and the streets around it. Other places close to Arowry include Hanmer (1 mile north), Maelor South (2 miles south-west), Rowe (2 miles south), Penley (2 miles west) and Breaden Heath (3 miles south). Within a short drive, we also cover Oswestry (12 miles south-west), Market Drayton (13 miles east), Whitchurch (5 miles east), Wem (7 miles south-east), Heathgates (15 miles south) and Ellesmere (5 miles south-west).
Local landmarks in Arowry
Our clients here include homes close to Hanmer Arms, St Chad's Church in Wales Voluntary Aided Primary School and St Chad's Church. Well-known places in the area include Oswestry Town Museum (2.7 miles north-east) and Scrape Cottage Mound (1 mile west). For a walk, there’s Hanmer Mere.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Nearby places to Arowry
Also in Arowry
About our accreditations · Every repair comes with a one-year guarantee.
