Shropshire · England
Bath re-enamelling & resurfacing in Rowe, Shropshire
Bath re-enamelling for Rowe, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
When to call us in Rowe
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Common reasons people in Rowe contact us include:
- An old resurfacing that’s failing
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
What to look for in a quote
- The length of the guarantee and what it covers
- Who will actually do the work
- What preparation is included
- What happens if they find more damage
About our bath re-enamelling in Rowe
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, basins & shower trays and acrylic baths, and people most frequently call us about an original cast iron bath that needs restoring and several chips and rust patches.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Rowe (SY12)
- Area hub
- Shropshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
It helps to know what we can’t do:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
See our pricing or resurfacing vs replacement cost guide.
Keeping it looking good
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Also in Rowe
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
What affects the price in Rowe
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How hard the colour is to match
- What the surface is made of
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear pictures are generally enough. It helps if you send:
- Any details about the material
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Rowe questions
Which areas do you work in?
We cover the entire UK, including Rowe and the rest of Shropshire. Send your postcode with your photos and we’ll confirm dates.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Are there extra charges for Rowe?
No. Our quotes include travel, and we charge the same wherever you are.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you cover Rowe?
Yes. We cover the entire UK and travel to Rowe and the rest of Shropshire. Send pictures and we will quote, or call 0345 017 0787.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
Send us a photo of the damage and a wider shot of the whole item, with your SY12 postcode, and we’ll come back with a fixed quote.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Where we work around Rowe
Rowe is about 10 miles east of Oswestry, in Shropshire. Across the SY12 area, we come to you. Rowe is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 34 miles away.
We cover every part of SY12. Nearby, we also work in Breaden Heath (1 mile west), Welshampton (1 mile west), Balmer Heath (1 mile south-west), Maelor South (2 miles north-west) and Arowry (2 miles north). We also work in nearby towns such as Shrewsbury (14 miles south), Oswestry (10 miles west), Market Drayton (14 miles east), Coleham (15 miles south), Kingsland (14 miles south) and Whitchurch (7 miles north-east).
Local landmarks in Rowe
Typical jobs here are in homes near St John the Baptist's Church and Welshampton CofE Primary School and the streets around them. Well-known places in the area include Penley Community Hospital (3.6 miles north-west) and Scrape Cottage Mound (2.3 miles north). Green spaces nearby include Park Pool.
About our accreditations · Every repair comes with a one-year guarantee.
