Shropshire · England
Bath re-enamelling & resurfacing in Maelor South, Shropshire
Local bath re-enamelling for Maelor South: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Bath re-enamelling in Maelor South without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for a roll-top that’s seen better days and an outdated colour you’d like to change, on basins & shower trays, acrylic baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Maelor South (SY12, SY13)
- Region
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
When to call us in Maelor South
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Signs it’s time to call us include:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
What your quote should include
- When it can be used again
- Is the price fixed, and does it include VAT?
- What preparation is included
- Whether they match the colour on site
Work for landlords and builders
For anyone letting property in or around Maelor South, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Covering Maelor South
Maelor South is about 7 miles west of Whitchurch, in Shropshire. Jobs in Maelor South are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Maelor South is one of 433 places in Shropshire where we work. We work right across the region, from Maelor South to Liverpool (33 miles away).
Our repair technicians cover all of the SY12 and SY13 postcode area and the streets around it. If you’re just outside Maelor South, we cover Penley (1 mile north-west), Arowry (2 miles north-east), Hanmer (2 miles north-east), Welshampton (2 miles south) and Breaden Heath (2 miles south). We also work in nearby towns such as Oswestry (10 miles south-west), Market Drayton (15 miles east), Whitchurch (7 miles east), Wem (7 miles south-east), Oxon (15 miles south) and Ditherington (15 miles south).
What’s near Maelor South
Our clients here include homes close to The Maelor School, among other places. Other landmarks nearby include Penley Community Hospital (1.6 miles north-west) and Scrape Cottage Mound (0.7 miles north-east). Not far away are Park Pool.
What affects the price in Maelor South
Prices start from £350. We charge the same across the UK, including Maelor South. What changes the price is:
- The type of damage
- Doing more than one item at once
- What the surface is made of
- How easy the damage is to reach
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your photos
Two or three clear pictures are normally enough. It helps if you send:
- Where you are, by postcode
- Whether it’s been repaired or coated before
- Something in shot to show the size
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
How to care for the repair
Once the work has cured, treat it gently:
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Don’t use the bath until it has fully cured
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Towns and villages near Maelor South
Also in Maelor South
FAQs for Maelor South
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Are there extra charges for Maelor South?
No. Our quotes include travel, and we charge the same wherever you are.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What happens after I send pictures?
You’ll get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Do you work in Maelor South?
Yes, we do. We send a technician to Maelor South for every job, and the price is the same as everywhere else.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
