East Renfrewshire · Scotland
Bath Re-enamelling for Arthurlie homes
Fixed-price bath re-enamelling in Arthurlie and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Repair or replace in Arthurlie?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Arthurlie customers choose us
- A fixed quote before booking
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Arthurlie without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are wear marks under the taps and an original cast iron bath that needs restoring.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Arthurlie (G78)
- Region
- East Renfrewshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
We will always be straight with you, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Landlords, agents and businesses in Arthurlie
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Towns and villages near Arthurlie
Also in Arthurlie
Common problems we fix in Arthurlie
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Look out for any of the following:
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What your quote should include
- What preparation is included
- Whether the colour is mixed to match
- Who turns up on the day
- If travel is included in the price
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Respect the curing time we give you
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About Arthurlie
Arthurlie is about 3 miles north-west of Newton Mearns, in East Renfrewshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 17 towns and villages across East Renfrewshire, from the larger towns to small villages. You can also see our page for Glasgow, about 6 miles away.
Every address in G78 is covered. That includes homes on Water Road, Park Avenue and Main Street and the roads around them. You will find Arthurlie on the A736, which makes it straightforward to reach. Close by, we cover Barrhead (1 mile north-east), Auchenback (1 mile east), Patterton (3 miles east), Deaconsbank (3 miles east) and Newton Mearns (3 miles south-east). Further out, we also cover Giffnock (4 miles east), Clarkston (4 miles east), Eaglesham (6 miles south-east), Busby (5 miles east), Carmunnock (6 miles east) and Jackton (7 miles south-east).
Landmarks near Arthurlie
Typical jobs here are in homes near Bourock Parish Church and Barrhead High School and the streets around them. Arthurlie’s nearest station is Barrhead station, roughly 0.5 miles north of the centre. Further afield, we also cover the area around Barrhead Museum (0.5 miles north-east) and Dykebar Hospital (1.9 miles north). The countryside around Arthurlie includes Neilston Pad and Brother Loch.
Arthurlie questions
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
About our accreditations · Every repair comes with a one-year guarantee.
