Leeds · England
Bath re-enamelling & resurfacing in Arthursdale, Leeds
Bath re-enamelling in and around Arthursdale: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Bath re-enamelling in Arthursdale without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are a bath in a colour that no longer suits and stains that won’t shift.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Arthursdale (LS14, LS15)
- Region
- Leeds
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Arthursdale
What else we do in Arthursdale
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Arthursdale. The price depends on:
- The material
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can generally get a fixed quote without us visiting. To make it quick:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Let us know about parking or access
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Get a quote
Upload a picture of the damage and a wider shot of the whole item, with your LS14 postcode, and we will reply with a fixed quote.
Advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Arthursdale and nearby
Arthursdale is about 3 miles east of Gipton, in Leeds. Whether you’re in the middle of Arthursdale or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 198 towns and villages in Leeds, from the larger towns to small villages.
We cover every part of LS14 and LS15 and the streets around it. Jobs here include addresses on Leeds Road, Oaklea Road and Main Street and the roads around them. We also cover the places around Arthursdale: Scholes (1 mile north), Stanks (1 mile south-west), Pendas Fields (1 mile south), Swarcliffe (1 mile west) and Whinmoor (1 mile north-west). Further out, we also cover Leeds (5 miles west), Morley (9 miles south-west), Pudsey (10 miles west), Rothwell (5 miles south), Beeston (6 miles south-west) and Farsley (10 miles west).
Landmarks near Arthursdale
We visit homes around Scholes (Elmet) Primary School, John Smeaton Academy and The Barley Corn Inn and the streets around them. Arthursdale’s nearest station is Cross Gates station, about 1.3 miles south-west of the centre. Well-known places in the area include Seacroft Hospital (1.9 miles south-west). The countryside around Arthursdale includes Norwood Bottoms.
What we’re called out for in Arthursdale
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Wear marks under the taps
- Stains that will not shift
What your quote should include
- When it can be used again
- What happens if they find more damage
- How long the guarantee is and what it covers
- Aftercare advice
Landlord and trade work in Arthursdale
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Materials we work on in Arthursdale
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
FAQs for Arthursdale
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
About our accreditations · Every repair comes with a one-year guarantee.
