Leicestershire · England
Bath re-enamelling & resurfacing in Asfordby Hill, Leicestershire
Full bath re-enamelling and resurfacing at your home in Asfordby Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- We leave the room as we found it
- Colour-matched on site
- We come to you, anywhere in the UK
- Most jobs done in one visit
See our prices page and bath cost comparison.
Bath re-enamelling in Asfordby Hill, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. If you are dealing with an original cast iron bath that needs restoring and thin, worn enamel in places, we can normally put it right, on basins & shower trays, pressed steel baths and cast iron baths alike.
Whatever the size of the job, you get the same one-year guarantee in Asfordby Hill and across Leicestershire.
- Where
- Asfordby Hill (LE14)
- Area hub
- Leicestershire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Asfordby Hill and nearby
Asfordby Hill is about 2 miles west of Melton Mowbray, in Leicestershire. Across the LE14 area, we carry out the work at your property. We work in 287 places across Leicestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 45 miles away.
We cover every part of LE14. From Crompton Road, Stanton Road and Glebe Road or a nearby road, a technician can come to you. Neighbouring places we cover include Kirby Bellars (1 mile south-west), Welby (1 mile north-east), Asfordby (1 mile west), Potter Hill (2 miles north) and Saxelbye (2 miles north-west). We also work in nearby towns such as Loughborough (12 miles west), Wigston (15 miles south-west), Shepshed (15 miles west), Syston (8 miles south-west), Shelthorpe (12 miles west) and Sileby (8 miles west).
Around Asfordby Hill
Around Asfordby Hill, we work in homes near Asfordby Hill Primary School, Long Field Academy and The Crown pub and the streets around them. Asfordby Hill’s nearest station is Melton Mowbray station, roughly 1.8 miles east. A little further out are The Mount motte at Melton Mowbray (1.4 miles east). Open spaces near Asfordby Hill include Ankle Hill.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The material
- How many areas need work
- Any earlier repairs that need removing first
- The type of damage
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Where you are, by postcode
- What it’s made of, if you know
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
For a price in Asfordby Hill, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Landlord and trade work in Asfordby Hill
Landlords, letting agents and housing providers in Asfordby Hill use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
If you manage property in Asfordby Hill, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
How to look after the repair
So the finish stays in good condition for years:
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Ensure the area is dry
- Clear the area around the damage
- Tell us about parking, stairs or access
Getting a price
Send us a photo of the damage and one of the entire item, and tell us you are in Asfordby Hill, and we’ll reply with a fixed price.
Related advice
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Your questions about bath re-enamelling in Asfordby Hill
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do you cover the whole of Leicestershire?
Across the UK. Prices do not change with location.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Common problems we fix in Asfordby Hill
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The things customers usually mention when they call are:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Wear marks under the taps
Questions to ask before you book
- Whether the colour is mixed to match
- How soon you can use it again
- How your room will be protected
- Who will actually do the work
Also near Asfordby Hill
What else we do in Asfordby Hill
About our accreditations · Every repair comes with a one-year guarantee.
