Kent · England
Bath re-enamelling & resurfacing in Ash, Kent
Fixed-price bath re-enamelling in Ash and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that won’t come clean
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Have chips seen to early
- Do not let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Bath re-enamelling in Ash without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include a bath that stays dull however much you clean it and staining under the taps and around the waste, across basins & shower trays, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Ash (TN15, DA3)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Access to the area
- Unusual colours or finishes
- Whether we combine several jobs
- The type of damage
We charge the same wherever you are, so there’s no premium for Ash. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Phone pictures are fine, there is no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Details of any past repairs
- A close-up of the damage, in focus
Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Ash, and we will come back with a fixed quote.
Landlord and trade work in Ash
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Other services in Ash
Repair or replace in Ash?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
- Nothing taken out or refitted
Take a look at our prices page and bath cost comparison.
Common problems we fix in Ash
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Most people contact us after spotting one of these:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Before you book anyone
- Whether the price covers travel
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- When it can be used again
FAQs for Ash
How do I get a price for bath re-enamelling in Ash?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Getting a price
To get a price, send a couple of photos using our quote form or call us. We will say immediately if a repair is the right fix.
Advice
What we can’t put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Ash and the surrounding area
Ash is about 6 miles south-west of Northfleet, in Kent. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 19 miles away.
We cover every part of TN15 and DA3. From Ash Road, The Street and Billet Hill or anywhere nearby, we can come to you. Other places close to Ash include West Yoke (1 mile north), Fawkham Green (1 mile north-west), Speed Gate (1 mile north-west), Stansted (2 miles south) and West Kingsdown (2 miles south-west). Larger places within reach include Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north-east) and Tonbridge (11 miles south).
Local landmarks in Ash
Typical jobs here are in homes near New Ash Green Primary School, Parish Church of Saint Peter and Saint Paul and The White Swan Public House, among other places. Ash’s nearest station is Longfield station, about 2.8 miles north of the centre. Further afield, we also cover the area around Darent Valley Hospital (5.6 miles north) and Eynsford Castle (3.6 miles west).
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
