Somerset · England
Bath re-enamelling & resurfacing in Ashcott, Somerset
Full bath re-enamelling and resurfacing at your home in Ashcott, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Ashcott
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the day after. Our technicians work on Victorian roll-tops, pressed steel baths and acrylic baths, and people most frequently call us about a coating lifting around the plughole and a bath in a colour that no longer suits.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Ashcott (TA7)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Ensure the room can be ventilated
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Advice
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Ashcott. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Ashcott
- One price list for the whole UK
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Usually one visit, start to finish
Read our pricing and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The material
- The colour and finish to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- Any details about the material
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Email us pictures of the damage and one of the entire item, and tell us you are in Ashcott, and we will come back with a fixed quote.
Where we work around Ashcott
Ashcott is about 8 miles east of Bridgwater, in Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 640 towns and villages in Somerset.
Our visits in TA7 work the same way as everywhere else we cover. Jobs here include addresses on High Street, Chapel Hill and High View Drive and the roads around them. Neighbouring places we cover include Pedwell (1 mile south-west), Shapwick (1 mile north-west), Nythe (2 miles south-west), Moorlinch (2 miles west) and Catcott (3 miles north-west). Larger places within reach include Taunton (15 miles south-west), Bridgwater (8 miles west), Yeovil (14 miles south-east), Burnham-on-Sea (11 miles north-west), Wells (9 miles north-east) and Shepton Mallet (12 miles east).
Landmarks near Ashcott
Locally, our jobs take us to homes close to Shapwick School, Ring O' Bells pub and Church of All Saints and the streets around them. A little further out are Clarks Village (3 miles east) and Shoemakers Museum (3 miles east). For a walk, there’s Ham Wall and Glastonbury Tor.
- Local facilities include Sedgemoor (less than half a mile north-east)
Your questions about bath re-enamelling in Ashcott
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
What areas do you cover?
The whole UK, including all of Somerset. Send your postcode with your pictures and we will offer you dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens next?
We come back with a fixed price, plus dates. There is no obligation to book.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Aftercare tips
How the surface is treated afterwards matters:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What else we do in Ashcott
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
