Somerset · England
Bath re-enamelling & resurfacing in Moorlinch, Somerset
Full bath re-enamelling and resurfacing in Moorlinch, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
What affects the price in Moorlinch
Prices start from £350. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- How many items we do on one visit
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- Where you are, by postcode
- A picture taken from further back
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Bath re-enamelling in Moorlinch, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, acrylic baths and Victorian roll-tops, and people most often call us about worn patches where water runs and sits and lots of chips and rust spots.
All our work comes with a one-year guarantee, wherever you are in Somerset.
- Area
- Moorlinch (TA7)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Moorlinch
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we are called about are:
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Wear marks under the taps
Comparing quotes
- What preparation is included
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
What we can’t put right
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Repair dripping taps early
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Common questions in Moorlinch
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
What happens next?
We come back with a fixed quote, generally with dates to choose from. There’s no obligation to book.
Our work in Moorlinch
Moorlinch is about 6 miles east of Bridgwater, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Moorlinch is one of 640 towns and villages in Somerset we cover.
Our visits in TA7 work the same way as everywhere else we cover. Jobs here include addresses on Spring Lane and Moor Road. If you are just outside Moorlinch, we cover Shapwick (1 mile north-east), Pedwell (2 miles east), Catcott (2 miles north), Sutton Mallet (2 miles west) and Nythe (2 miles south-east). Further out, we also cover Taunton (13 miles south-west), Bridgwater (6 miles west), Burnham-on-Sea (10 miles north-west), Wells (11 miles north-east), Shepton Mallet (14 miles east) and Street (5 miles east).
What’s near Moorlinch
Around Moorlinch, we work in homes near Shapwick School, Ring O' Bells pub and Church of St Mary and the streets around them. Well-known places in the area include Sedgemoor (2.6 miles east) and Bridgwater Community Hospital (5.1 miles west). Not far away are Burrow Mump and Ham Wall.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the room can be ventilated
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Repairing versus replacing in Moorlinch
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- One visit for most repairs
- Free fixed quotes from pictures
- No extra charge for your area
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
Also near Moorlinch
Also in Moorlinch
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Moorlinch, we will quote for several properties at once. Send photos for each one and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
