Hertfordshire · England
Bath Re-enamelling in Ashridge
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Ashridge. Send photos for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Ashridge questions
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How do I get a price for bath re-enamelling in Ashridge?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
About our bath re-enamelling in Ashridge
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We are frequently asked to fix lots of chips and rust spots and a coating lifting around the plughole, on pressed steel baths, Victorian roll-tops and basins & shower trays.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Ashridge (HP4)
- Area hub
- Hertfordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Nothing taken out or refitted
- We’ll tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Read our prices page or guide to resurfacing and replacement costs.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Ashridge?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
If you can see any of these, send us a picture:
- A roll-top that is seen better days
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Comparing quotes
- If travel is included in the price
- What the guarantee covers, and for how long
- Whether they match the colour on site
- What aftercare is recommended
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- The material and finish
- Access to the area
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
If you’re in Ashridge and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About Ashridge
Ashridge is about 3 miles north of Berkhamsted, in Hertfordshire. Jobs in Ashridge are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Ashridge is one of 381 towns and villages in Hertfordshire we cover. You can also see our page for London, about 29 miles away.
Every address in HP4 is covered. Close by, we cover Nettleden (2 miles south-east), Norcott Hill (2 miles south-west), Frithsden (2 miles south-east), Great Gaddesden (2 miles east) and Northchurch (2 miles south-west). Within a short drive, we also cover Watford (12 miles south-east), Hemel Hempstead (5 miles south-east), St Albans (10 miles east), Harpenden (9 miles east), Hatfield (14 miles east) and Berkhamsted (3 miles south).
Local landmarks in Ashridge
Ashridge’s nearest station is Berkhamsted station, roughly 2.5 miles south. Further afield, we also cover the area around Hawridge Court (4.8 miles south-west) and Hemel Hempstead Hospital (5.1 miles south-east). Green spaces nearby include Sallowsprings and Ivinghoe Beacon.
Nearby places to Ashridge
Other services in Ashridge
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A metal bath with a through crack
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Work for landlords and builders
Landlords, letting agents and housing providers in Ashridge use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Ashridge, we will quote for several properties at once. Just send photos for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
