Buckinghamshire · England
Bath re-enamelling & resurfacing in Askett, Buckinghamshire
Bath re-enamelling for Askett, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Bath re-enamelling in Askett, done in place
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include lots of chips and rust spots and a bath that stays dull however much you clean it, on acrylic baths, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Area
- Askett (HP27)
- Region
- Buckinghamshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Our work in Askett
Askett is about 5 miles south of Aylesbury, in Buckinghamshire. We visit clients in Askett and nearby villages, so nothing has to leave your home. Askett is one of 263 towns and villages in Buckinghamshire where we work. We work right across the region, from Askett to London (about 35 miles away).
Postcode districts we cover here: HP27. Jobs here include addresses on Askett Village Lane, Old Manor Close and Askett Lane. Close by, we cover Monks Risborough (1 mile south-west), Lower Cadsden (1 mile south-east), Whiteleaf (1 mile south-east), Great Kimble (1 mile north-east) and Meadle (1 mile north-west). Further out, we also cover Aylesbury (5 miles north), High Wycombe (8 miles south), Chesham (9 miles east), Marlow (12 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Local landmarks in Askett
Our clients here include homes close to Church of St Dunstan, The Three Crowns pub and Princes Risborough School. The nearest railway station is Monks Risborough station, roughly 0.5 miles south-west of the centre. Further afield, we also cover the area around Stoke Mandeville Hospital (4.1 miles north) and Great Kimble Dial Hill (0.8 miles north-east). The countryside around Askett includes Beacon Hill and Brush Hill Local Nature Reserve.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Askett. The price reflects:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear pictures are typically enough. It helps if you send:
- Details of any past repairs
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Any details about the material
Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Askett, and we will come back with a fixed quote.
Askett: your questions answered
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Are there extra charges for Askett?
There’s no separate call-out charge. Your fixed quote includes everything.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How long is the bath unusable?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Do you need bath re-enamelling in Askett?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Common reasons people in Askett contact us include:
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- What aftercare is recommended
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Places near Askett
Other services in Askett
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
