Buckinghamshire · England
Bath re-enamelling & resurfacing in High Wycombe, Buckinghamshire
Full bath re-enamelling and resurfacing in High Wycombe, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Questions from High Wycombe
How much does bath re-enamelling cost in High Wycombe?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Bath re-enamelling at your home in High Wycombe
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix lots of chips and rust spots and a peeling or bubbling previous coating, in Victorian roll-tops, acrylic baths and basins & shower trays.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- High Wycombe (HP13, HP11, HP12, HP10)
- Area hub
- Buckinghamshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Advice
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The colour and finish to match
- How many areas need work
- Whether we combine several jobs
- The material and finish
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Where you are, by postcode
- The material, if you know it
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When to call us in High Wycombe
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
The most common problems we’re called about are:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Questions to ask before booking
- How the room is protected while they work
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- How to look after the finish
When a repair is not the answer
We will always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
About High Wycombe
High Wycombe is about 28 miles south of Milton Keynes, in Buckinghamshire. Anywhere in HP13, we carry out the work at your property. Our technicians cover all 263 towns and villages in Buckinghamshire. We work right across the region, from High Wycombe to London (about 30 miles away).
Our visits in HP13, HP11, HP12 and HP10 work the same way as everywhere else we cover. From High Street, Church Square and Queens Square or a nearby road, a technician can come to you. With the A40 and A404 close by, High Wycombe is easy for our technicians to reach. Nearby, we also work in Totteridge (1 mile east), Terriers (1 mile north-east), Wycombe Marsh (1 mile south-east), Micklefield (1 mile east) and Downley (2 miles north-west). Further out, we also cover Aylesbury (13 miles north), Chesham (8 miles north-east), Marlow (4 miles south), Amersham (7 miles north-east), Beaconsfield (5 miles east) and Chalfont St Peter (8 miles east). High Wycombe is one of the larger places we cover in Buckinghamshire.
Near you in High Wycombe
Locally, our jobs take us to homes close to Hamilton Academy, The Tower and Three Tuns Public House. Other local landmarks include London Central Elementary High School (0.9 miles south) and Church of All Saints (under half a mile north-west). There is a railway station in High Wycombe itself: High Wycombe station. Well-known places in the area include Eden (under half a mile west) and High Wycombe Castle (under half a mile north). Open spaces near High Wycombe include Gomm's Wood.
Landlords, agents and businesses in High Wycombe
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Also near High Wycombe
Also in High Wycombe
About our accreditations · Every repair comes with a one-year guarantee.
