Lincolnshire · England
Bath Re-enamelling for Asterby homes
Bath re-enamelling in and around Asterby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- An original cast iron bath that needs restoring
Bath re-enamelling in Asterby without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are frequently asked to fix thin, worn enamel in places and chips and rust in more than one place, on Victorian roll-tops, acrylic baths and cast iron baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Asterby (LN11)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Asterby
Landlords, letting agents and housing providers in Asterby use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Other services in Asterby
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Get any chip repaired quickly
- Repair dripping taps early
- Respect the curing time we give you
- Keep suction mats out of the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We look at:
- The material
- How hard the colour is to match
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
When we would advise against a repair
It helps to know what we cannot do:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Asterby
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Asterby questions
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Asterby and the surrounding area
Asterby is about 7 miles south-west of Louth, in Lincolnshire. We travel to customers in Asterby, so nothing has to leave your home. We work in all 732 towns and villages across Lincolnshire. We work right across the region, from Asterby to Leeds (about 69 miles away).
All of LN11 is within our area. Jobs here include addresses on Asterby Lane, Ranyard Lane and Asterby End and the roads around them. Other places close to Asterby include Goulceby (1 mile west), Ranby (2 miles west), Hemingby (3 miles south-west), Sotby (4 miles west) and Baumber (4 miles south-west). Further out, we also cover Louth (7 miles north-east), Horncastle (6 miles south), Mablethorpe (15 miles east), Woodhall Spa (11 miles south-west), Market Rasen (11 miles north-west) and Spilsby (12 miles south-east).
Near you in Asterby
Around Asterby, we work in homes near Church of St Peter and Scamblesby Church of England Primary School and the streets around them. Other landmarks nearby include Benniworth Castle (3.7 miles north-west) and War Memorial Hospital (5.8 miles south). Green spaces nearby include Juicetrump Hill.
Repair or replace in Asterby?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
Why Asterby clients choose us
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our prices page or bath cost comparison.
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Advice
Do you need bath re-enamelling in Asterby?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
What to look for in a quote
- Whether a trained technician does the job
- What aftercare is recommended
- What protection goes down before work starts
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
