Cheshire East · England
Bath Re-enamelling in Aston by Wrenbury
Bath re-enamelling in Aston by Wrenbury without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- An old resurfacing that’s failing
About our bath re-enamelling in Aston by Wrenbury
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Aston by Wrenbury (CW5)
- Area hub
- Cheshire East
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
It helps to know what we cannot do too:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
FAQs for Aston by Wrenbury
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you cover the entire of Cheshire East?
Everywhere in the UK, Aston by Wrenbury included. There is no extra charge for travel.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Do you come to Aston by Wrenbury?
Yes. We work across the UK and travel to Aston by Wrenbury. Send us pictures for a fixed quote, or call 0345 017 0787.
Our work in Aston by Wrenbury
Aston by Wrenbury is about 4 miles south-west of Nantwich, in Cheshire East. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 254 places in Cheshire East. You can also see our page for Liverpool, about 31 miles away.
Postcode districts we cover here: CW5. You’ll find streets such as Heatley Lane, Whitchurch Road and Slaughterhouse Lane. Other places close to Aston by Wrenbury include Broomhall Green (1 mile north-east), Aston (1 mile south-west), Sound (1 mile north-east), Newhall (1 mile south-west) and Salesbrook (1 mile south). Further out, we also cover Crewe (7 miles north-east), Nantwich (4 miles north-east), Middlewich (13 miles north-east), Sandbach (12 miles north-east), Coppenhall (8 miles north-east) and Holmes Chapel (15 miles north-east).
Local landmarks in Aston by Wrenbury
Around Aston by Wrenbury, we work in homes near Sound and District Primary School, among other places. The closest station to Aston by Wrenbury is Wrenbury station, roughly 1.2 miles west of the centre. Nearby you’ll also find Nantwich Castle (3.9 miles north-east) and Nantwich Workhouse (4.6 miles north-east).
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Looking after it afterwards
Nothing complicated is needed:
- Wash away dyes and oils after use
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Any earlier repairs that need removing first
- The colour and finish to match
- How easy the damage is to reach
- Doing more than one item at once
We charge the same wherever you are, with no extra for Aston by Wrenbury. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
Two or three clear pictures are usually enough. It helps if you send:
- What it’s made of, if you know
- Something in shot to show the size
- The postcode, so we can plan the visit
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Nearby places to Aston by Wrenbury
Also in Aston by Wrenbury
Landlord and trade work in Aston by Wrenbury
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
When to call us in Aston by Wrenbury
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Most people get in touch after spotting something like this:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Questions to ask before booking
- What prep work is covered
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- How soon you can use it again
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take most of the day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Let us know which floor the room is on
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
