Cheshire East · England
Bath re-enamelling & resurfacing in Salesbrook, Cheshire East
Our technicians come to Salesbrook for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
Landlords, agents and businesses in Salesbrook
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our bath re-enamelling in Salesbrook
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for a peeling or bubbling previous coating and stains that won’t shift, across cast iron baths, basins & shower trays and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Salesbrook (CW5)
- Area hub
- Cheshire East
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Salesbrook
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
It’s worth getting a quote if you see:
- Brown or grey marks that don’t clean off
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Questions to ask before booking
- How your room will be protected
- What preparation is included
- How long it needs to cure
- What happens if they find more damage
How to care for the repair
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why us?
- Everything repaired in place
- Normally one visit, start to finish
- Dust sheets down, tidy finish
- One price list for the entire UK
Read our full price list and resurfacing vs replacement cost guide.
Nearby places to Salesbrook
Other services in Salesbrook
When a repair isn’t the answer
In fairness, some problems need a different fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Salesbrook
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Let us know about parking or access
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Salesbrook and the surrounding area
Salesbrook is about 5 miles north-east of Whitchurch, in Cheshire East. We visit customers in Salesbrook, so there’s no workshop to go to. Salesbrook is one of 254 places in Cheshire East we cover. We work right across the region, from Salesbrook to Liverpool (about 32 miles away).
We cover every part of the CW5 postcode area and the streets around it. Jobs here include addresses on Salesbrook Lane and Sheppenhall Lane. If you’re just outside Salesbrook, we cover Newhall (1 mile north-west), Aston (1 mile north), Aston by Wrenbury (1 mile north), Broomhall Green (2 miles north) and Sound (2 miles north). We also work in nearby towns such as Crewe (9 miles north-east), Nantwich (5 miles north-east), Middlewich (14 miles north-east), Sandbach (13 miles north-east), Coppenhall (9 miles north-east) and Leighton (9 miles north-east).
Local landmarks in Salesbrook
The nearest railway station is Wrenbury station, about 1.6 miles north-west of the centre. Other landmarks nearby include Whitchurch Community Hospital (4.7 miles south-west).
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What affects the price in Salesbrook
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The type of damage
- Unusual colours or finishes
- How many items we do on one visit
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- What it’s made of, if you know
- The postcode, so we can plan the visit
Upload photos of the damage and a wider shot of the whole item, with your CW5 postcode, and we will reply with a fixed price.
Salesbrook questions
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
About our accreditations · Every repair comes with a one-year guarantee.
