Leicestershire · England
Bath Re-enamelling in Aston Flamville
Full bath re-enamelling and resurfacing at your home in Aston Flamville, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
How we handle bath re-enamelling in Aston Flamville
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We work on basins & shower trays, acrylic baths and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and an old resurfacing that’s failing.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Aston Flamville (LE10)
- County
- Leicestershire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repair or replace in Aston Flamville?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Aston Flamville clients choose us
- Everything repaired in place
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and bath cost comparison.
Our work in Aston Flamville
Aston Flamville is about 2 miles east of Hinckley, in Leicestershire. Clients in Aston Flamville get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Aston Flamville is one of 287 towns and villages in Leicestershire where we work. Our nearest city page is Birmingham, about 24 miles away.
Jobs in LE10 work the same way as everywhere else we cover. Jobs here include addresses on Hinckley Road and Lychgate Lane and the roads around them. We also cover the places around Aston Flamville: Burbage (1 mile west), Smockington (2 miles south), Elmesthorpe (2 miles north), Sketchley (2 miles west) and Hinckley (2 miles west). We also work in nearby towns such as Wigston (10 miles east), Coalville (13 miles north), Syston (15 miles north-east), Lutterworth (7 miles south-east), Blaby (7 miles east) and Broughton Astley (4 miles east).
Around Aston Flamville
Our customers here include homes close to Church of St Peter and Hastings High School, among other places. For rail, the closest station is Hinckley station, about 2.2 miles west of the centre. A little further out are Hinckley and District Museum (2.4 miles west). For a walk, there’s Stoney Cove and Croft Hill.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Aston Flamville. The price depends on:
- The material
- Where the damage is and how we get to it
- How hard the colour is to match
- The size and number of damaged areas
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Send us a photo of the damage and one of the entire item, with your LE10 postcode, and we’ll come back with a fixed quote.
Common problems we fix in Aston Flamville
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
The things customers generally mention when they call include:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Wear marks under the taps
Questions to ask before booking
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
- Who turns up on the day
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Let us know about parking or access
- Clear the area around the damage
- Make sure the room can be ventilated
Ask for a price
To get a price, send a couple of pictures using our quote form or call us. We will say right away whether it can be repaired.
Advice
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Questions from Aston Flamville
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you come to Aston Flamville?
Yes. We cover the entire UK and come to Aston Flamville and the rest of Leicestershire. Send us photos for a fixed quote, or call 0345 017 0787.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Nearby places to Aston Flamville
Also in Aston Flamville
About our accreditations · Every repair comes with a one-year guarantee.
