Nottinghamshire · England
Bath Re-enamelling in Attenborough
Full bath re-enamelling and resurfacing in Attenborough, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Stains that will not shift
Bath re-enamelling in Attenborough without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a roll-top that’s seen better days and brown or grey marks that don’t clean off, across cast iron baths, pressed steel baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Attenborough (NG9)
- Region
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Attenborough
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The size and number of damaged areas
- Whether we combine several jobs
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- The material, if you know it
- A clear, close picture of the problem area
- A photo taken from further back
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Attenborough: your questions answered
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What areas do you cover?
We cover the entire UK, including Attenborough and the rest of Nottinghamshire. Just include your postcode and we’ll confirm dates.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Attenborough.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Also near Attenborough
Other services in Attenborough
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
- No need to remove anything
- No extra charge for your area
See our prices page and bath cost comparison.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Our work in Attenborough
Attenborough is about 1 mile south of Beeston, in Nottinghamshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 329 towns and villages across Nottinghamshire, from the larger towns to small villages. You can also see our page for Birmingham, about 41 miles away.
Jobs in NG9 work the same way as everywhere else we cover. Whether you live on Long Lane, Shady Lane and Elm Avenue or anywhere nearby, we can come to you. Other places close to Attenborough include Chilwell (1 mile north), Toton (1 mile west), Beeston (1 mile north), Bramcote (2 miles north) and Lenton Abbey (2 miles north). Larger places within reach include Carlton (7 miles north-east), Sutton in Ashfield (15 miles north), Hucknall (9 miles north), West Bridgford (4 miles east), Netherfield (8 miles north-east) and Eastwood (8 miles north).
Around Attenborough
In Attenborough, that means homes near The Corn Mill pub, Chilwell School and Chetwynd Primary Academy, among other places. Attenborough has its own railway station: Attenborough station. Other landmarks nearby include Museum of the Mercian Regiment (0.8 miles north-west) and Queen's Medical Centre (3.2 miles north-east). Not far away are Attenborough Nature Reserve and Wilford Hill.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we work on in Attenborough
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Signs you need bath re-enamelling in Attenborough
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
The most common problems we’re called about are:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Stains that won’t shift
- Lots of chips and rust spots
What your quote should include
- Whether a trained technician does the job
- Whether the price covers travel
- What happens if they find more damage
- How long it needs to cure
Work for landlords and builders
For anyone letting property in or around Attenborough, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
