Nottingham · England
Bath Re-enamelling for Bramcote Hills homes
Bath re-enamelling in Bramcote Hills without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- Worn patches where water runs and sits
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send two or three photos through our quote form or call us. We will say immediately if a repair is the right fix.
Read more
Bath re-enamelling in Bramcote Hills, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for wear marks under the taps and an old resurfacing that’s failing, in Victorian roll-tops, acrylic baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bramcote Hills (NG9, NG8)
- Region
- Nottingham
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Nearby places to Bramcote Hills
Other services in Bramcote Hills
When to call us in Bramcote Hills
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Most people get in touch when they notice one of these:
- A roll-top that’s seen better days
- Several chips and rust patches
- Thin, worn enamel in places
- A coloured bath you want in white
What to look for in a quote
- What preparation is included
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether they match the colour on site
Bramcote Hills questions
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you work in Bramcote Hills?
We do. Repair technicians travel to Bramcote Hills from across the region, and the price is the same as everywhere else.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
When a repair isn’t the answer
We won’t take on work that will not last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Bramcote Hills
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
If you manage property in Bramcote Hills, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Where we work around Bramcote Hills
Bramcote Hills is about 1 mile north of Beeston, in Nottingham. We travel to customers in Bramcote Hills and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover 51 places across Nottingham, from the larger towns to small villages. You can also see our page for Birmingham, about 42 miles away.
Jobs in NG9 and NG8 work the same way as everywhere else we cover. Jobs here include addresses on Cow Lane, Moor Lane and Derby Road. Bramcote Hills sits on or near the A52, so getting to you is simple. Neighbouring places we cover include Bramcote (1 mile south-west), Wollaton (1 mile north), Trowell Moor (1 mile north), Lenton Abbey (1 mile east) and Beeston (1 mile south). We also work in nearby towns such as Nottingham (4 miles north-east), Arnold (6 miles north-east), Bulwell (5 miles north-east), Sneinton (5 miles east), St Ann's (5 miles east) and Clifton (3 miles south-east).
Landmarks near Bramcote Hills
Around Bramcote Hills, we work in homes near Bramcote Hills Primary School, Dagfa House School and Alderman White School. Also close by are Church of St. Michael and All Angels (less than half a mile south-west) and The White Lion pub (0.5 miles south-west). The closest station to Bramcote Hills is Beeston station, about 1.9 miles south-east. Well-known places in the area include Queen's Medical Centre (2.3 miles east) and intu Broadmarsh (3.9 miles east). The countryside around Bramcote Hills includes Wilford Hill and Attenborough Nature Reserve.
Aftercare tips
To keep it looking its best:
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Store bottles off the bath
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What affects the price in Bramcote Hills
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether we combine several jobs
- The colour and finish to match
- The material and finish
- How easy the damage is to reach
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Two or three clear photos are typically enough. Try to include:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
