Norfolk · England
Bath Re-enamelling in Attlebridge
Local bath re-enamelling for Attlebridge: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Bath re-enamelling in Attlebridge without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s staining under the taps and around the waste and wear marks under the taps, we can usually put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Attlebridge (NR9)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Attlebridge: your questions answered
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Attlebridge.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair will not do:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Landlord and trade work in Attlebridge
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Attlebridge
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Whether we combine several jobs
- Where the damage is and how we get to it
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
Email us a photo of the damage and a wider shot of the entire item, and tell us you’re in Attlebridge, and we’ll reply with a fixed price.
Common problems we fix in Attlebridge
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Contact us if you’ve noticed any of these:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A coating lifting around the plughole
What your quote should include
- What prep work is covered
- Whether they match the colour on site
- The length of the guarantee and what it covers
- How the room is protected while they work
Attlebridge and the surrounding area
Attlebridge is about 8 miles north-west of Norwich, in Norfolk. Customers in Attlebridge get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Attlebridge is one of 797 towns and villages in Norfolk we cover.
Jobs in NR9 are booked in the same way as anywhere else. Jobs here include addresses on Station Road and Old Fakenham Road and the roads around them. If you are just outside Attlebridge, we cover Morton (1 mile west), Morton on the Hill (1 mile west), Alderford (1 mile north), Swannington (1 mile north) and Hengrave (1 mile north). We also work in nearby towns such as Norwich (8 miles south-east), Dereham (9 miles west), Wymondham (9 miles south), Sprowston (8 miles south-east), Thorpe St Andrew (10 miles south-east) and Attleborough (15 miles south-west).
What’s near Attlebridge
Around Attlebridge, we work in homes near Taverham High School and Church of St Andrew. Other landmarks nearby include Hellesdon Hospital (5.4 miles south-east) and Costessey Hall (4.1 miles south-east).
Towns and villages near Attlebridge
What else we do in Attlebridge
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
