Norfolk · England
Bath Re-enamelling for Morton on the Hill homes
Our technicians come to Morton on the Hill for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coating lifting around the plughole
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- A year’s guarantee on all work
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Generally one visit, start to finish
See our pricing or resurfacing vs replacement cost guide.
Bath re-enamelling in Morton on the Hill without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people get in touch are several chips and rust patches and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee.
- Where
- Morton on the Hill (NR9)
- Region
- Norfolk
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say straight away whether it can be repaired.
Advice
Morton on the Hill questions
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Norfolk.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you cover Morton on the Hill?
Yes. We work across the UK and come to Morton on the Hill and the rest of Norfolk. Send us pictures for a fixed quote, or call 0345 017 0787.
Looking after it afterwards
So the finish stays in good condition for years:
- Repair dripping taps early
- Don’t use the bath until it has fully cured
- Do not leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What affects the price in Morton on the Hill
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Good photos mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- The material, if you know it
- One sharp close-up of the damage
If you are in Morton on the Hill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also near Morton on the Hill
What else we do in Morton on the Hill
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Morton on the Hill and the surrounding area
Morton on the Hill is about 3 miles north-west of Taverham, in Norfolk. Whether you’re in the middle of Morton on the Hill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Morton on the Hill is one of 797 towns and villages in Norfolk we cover.
Here we cover the NR9 postcode area. Streets in the area include The Street, Fakenham Road and Marl Hill Road, and we cover them all. Nearby, we also work in Morton (1 mile east), Attlebridge (1 mile east), Alderford (1 mile north), Swannington (2 miles north-east) and Lenwade (2 miles north-west). We also work in nearby towns such as Norwich (8 miles south-east), Dereham (9 miles west), Wymondham (9 miles south), Sprowston (8 miles south-east), Thorpe St Andrew (10 miles south-east) and Attleborough (15 miles south).
Local landmarks in Morton on the Hill
Our clients here include homes close to Church of St Andrew, among other places. Other landmarks nearby include Hellesdon Hospital (5.9 miles south-east) and Costessey Hall (4.4 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
