Wiltshire · England
Bath Re-enamelling for Atworth homes
Damaged bath in Atworth? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
FAQs for Atworth
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you repair something that’s been repaired before?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Are there extra charges for Atworth?
There’s no separate call-out charge. The fixed price covers the visit and the work.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Bath re-enamelling in Atworth without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s staining under the taps and around the waste and a period or roll-top bath worth keeping, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Atworth (SN12)
- County
- Wiltshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Atworth
When to call us in Atworth
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Common reasons people in Atworth contact us include:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Several chips and rust patches
Comparing quotes
- How long it needs to cure
- Whether they match the colour on site
- How to look after the finish
- Is the price fixed, and does it include VAT?
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How many items we do on one visit
- The material
- How much damage there is
- How easy the damage is to reach
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Atworth and the surrounding area
Atworth is about 3 miles north-west of Melksham, in Wiltshire. Anywhere in SN12, a technician comes to you. We cover 425 places across Wiltshire. You can also see our page for Birmingham, about 76 miles away.
All of SN12 is within our area, from the main roads to the quietest streets. You’ll find streets such as Bath Road, Mead Park and Godwins Close, all of which we cover. Nearby, we also work in Pie Corner (1 mile east), Norrington Common (1 mile south-east), Whitley (1 mile east), Shaw (1 mile east) and Broughton Gifford (2 miles south-east). Within a short drive, we also cover Trowbridge (5 miles south), Chippenham (5 miles north-east), Calne (9 miles east), Devizes (9 miles east), Westbury (9 miles south) and Melksham (3 miles south-east).
Around Atworth
We visit homes around The White Hart pub, Church of St Michael and All Angels and Churchfields and the streets around them. The nearest railway station is Melksham station, roughly 2.2 miles south-east of the centre. Further afield, we also cover the area around Corsham (4.1 miles north) and Avon Tyre Museum (2.2 miles south-east).
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Store bottles off the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What a repair cannot fix
We will not take on work that will not last, so here’s what a repair can’t put right:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Atworth. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- We’ll tell you if it’s not worth repairing
- Normally one visit, start to finish
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
