Wiltshire · England
Bath & shower resealing (mastic) in Atworth, Wiltshire
Bath resealing across Atworth and nearby, done in a single visit in most cases.
- Damp near the bath
- Silicone coming away from the tiles
- Black mould in the sealant
How we handle bath resealing in Atworth
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. We regularly repair basins & vanity units, baths and wet rooms, and people most often call us about an untidy old seal and missing sealant behind the taps.
Every job is backed for twelve months in Atworth and everywhere else. We return to put right any problem with the work.
- Location
- Atworth (SN12)
- County
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Looking after it afterwards
Nothing complicated is needed:
- Air the room after use
- Reseal when black spots won’t clean off
- Clean the sealant gently and regularly
- Wipe the joints dry after use
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Same prices wherever you are
- No need to remove anything
Read our prices page.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Atworth as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Atworth and the surrounding area
Atworth is about 3 miles north-west of Melksham, in Wiltshire. Whether you’re in the middle of Atworth or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 425 places across Wiltshire, from the larger towns to small villages. Our jobs stretch from Atworth to Birmingham (76 miles away).
Our repair technicians cover all of SN12. Whether you live on Bath Road, Mead Park and Godwins Close or anywhere nearby, a technician can come to you. If you’re just outside Atworth, we cover Pie Corner (1 mile east), Norrington Common (1 mile south-east), Whitley (1 mile east), Shaw (1 mile east) and Broughton Gifford (2 miles south-east). Larger places within reach include Trowbridge (5 miles south), Chippenham (5 miles north-east), Calne (9 miles east), Devizes (9 miles east), Westbury (9 miles south) and Melksham (3 miles south-east).
Landmarks near Atworth
Locally, our jobs take us to homes close to The White Hart pub, Church of St Michael and All Angels and Churchfields, among other places. For rail, the closest station is Melksham station, about 2.2 miles south-east. Further afield, we also cover the area around Corsham (4.1 miles north) and Avon Tyre Museum (2.2 miles south-east).
How we price bath resealing
Each job gets its own fixed quote. These are the things that affect it:
- The type of damage
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Movement in the bath or tray
- Hollow or loose tiles
- Very wide gaps that need a trim
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
- Wet rooms
Places near Atworth
More services for Atworth
Questions from Atworth
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
How do I get a price for bath resealing in Atworth?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes around two hours. We leave the room clean and you’ll know when it can be used.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
