Nottinghamshire · England
Bath Re-enamelling in Austerfield
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Austerfield. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Bath re-enamelling at your home in Austerfield
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with brown or grey marks that don’t clean off and wear marks under the taps, we can help.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Austerfield (DN10)
- County
- Nottinghamshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Places near Austerfield
What else we do in Austerfield
Keeping it looking good
How the surface is treated afterwards matters:
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Have chips seen to early
- Keep suction mats out of the bath
Dry the bath after use if possible, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Questions from Austerfield
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How much does bath re-enamelling cost in Austerfield?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your DN10 postcode.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What areas do you cover?
The whole UK, including all of Nottinghamshire. Send your postcode with your photos and we’ll offer you dates.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send pictures?
We review the photos and send a fixed quote.
Common problems we fix in Austerfield
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Clients normally contact us about:
- Several chips and rust patches
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- Stains that will not shift
What to look for in a quote
- How changes to the job are handled
- What preparation is included
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, with your DN10 postcode, and we’ll reply with a fixed price.
Advice
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Doing more than one item at once
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Any earlier repairs or coatings
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Our work in Austerfield
Austerfield is about 7 miles south-east of Doncaster, in Nottinghamshire. Customers in Austerfield get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover 329 places in Nottinghamshire, from the larger towns to small villages. Our nearest city page is Leeds, about 34 miles away.
Every address in DN10 is covered, from the main roads to the quietest streets. Whether you live on High Street, South View and William Bradford Close or anywhere nearby, we can come to you. Neighbouring places we cover include Bawtry (1 mile south-west), Scrooby (2 miles south), Bircotes (3 miles south-west), Harworth (3 miles south-west) and Littleworth (3 miles north-west). We also work in nearby towns such as Worksop (10 miles south-west), Retford (9 miles south), Kilton (10 miles south-west), Creswell (15 miles south-west), Bracebridge (10 miles south-west) and Carlton in Lindrick (7 miles south-west).
Landmarks near Austerfield
In Austerfield, that means homes near Serlby Park Academy, Mayflower pub and Church of St Helena, among other places. Nearby you’ll also find Hospital of St Mary Magdalene (1 mile south-west) and Tickhill Castle (4.3 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
