Nottinghamshire · England
Bath Re-enamelling for Averham homes
Local bath re-enamelling for Averham: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that’s seen better days
Bath re-enamelling in Averham, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people get in touch are worn patches where water runs and sits and a bath in a colour that no longer suits.
All our work is covered by a one-year guarantee.
- Location
- Averham (NG23)
- Area hub
- Nottinghamshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Averham customers choose us
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Dust sheets down, tidy finish
- No extra charge for your area
Take a look at our prices page and bath cost comparison.
Places near Averham
More services for Averham
What a repair cannot fix
Some jobs aren’t right for a repair, for example:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Landlords, agents and businesses in Averham
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Where we work around Averham
Averham is about 2 miles west of Newark-on-Trent, in Nottinghamshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in 329 places in Nottinghamshire. Our nearest city page is Leeds, about 58 miles away.
Our visits in NG23 work the same way as everywhere else we cover. From Pinfold Lane, The Close and Staythorpe Road or a nearby road, a technician can come to you. If you’re just outside Averham, we cover Staythorpe (1 mile south-west), Kelham (1 mile north-east), Rolleston (2 miles south-west), Farndon (2 miles south) and Hawton (2 miles south-east). Larger places within reach include Mansfield (14 miles west), Carlton (12 miles south-west), Hucknall (15 miles west), Mansfield Woodhouse (15 miles north-west), Netherfield (12 miles south-west) and Forest Town (13 miles west).
What’s near Averham
Locally, our jobs take us to homes close to Church of St. Michael and All Angels, The Fox Inn and Manners Sutton Primary School, among other places. The closest station to Averham is Rolleston station, about 2 miles south-west. A little further out are Newark Castle (2.1 miles east) and Dukes Wood Oil Museum (0.9 miles north-east).
FAQs for Averham
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How do I get a price for bath re-enamelling in Averham?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
When to call us in Averham
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- Stains that won’t shift
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Wear marks under the taps
Questions to ask before booking
- How the colour is matched
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- How soon you can use it again
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
