Nottinghamshire · England
Bath re-enamelling & resurfacing in Rolleston, Nottinghamshire
Full bath re-enamelling and resurfacing for homes and businesses in Rolleston and across Nottinghamshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- A coloured bath you want in white
How we handle bath re-enamelling in Rolleston
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Typical jobs include a coating lifting around the plughole and stains that won’t shift, in pressed steel baths, cast iron baths and basins & shower trays.
Every repair is covered by a one-year guarantee.
- Area
- Rolleston (NG23)
- Area hub
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Rolleston
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Rolleston as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Nearby places to Rolleston
Also in Rolleston
What we are called out for in Rolleston
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients normally mention when they call include:
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Thin, worn enamel in places
- Lots of chips and rust spots
Comparing quotes
- What preparation is included
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
What affects the price in Rolleston
Prices start from £350. There is no area surcharge for Rolleston. The price reflects:
- Access to the area
- How many areas need work
- Whether we combine several jobs
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Rolleston. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
If you are in Rolleston and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Questions from Rolleston
Do you work in Rolleston?
Yes, we do. We send a technician to Rolleston for every job, and the price is the same as everywhere else.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
Are there extra charges for Rolleston?
There is no separate call-out charge. Your fixed quote includes everything.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Our work in Rolleston
Rolleston is about 4 miles west of Newark-on-Trent, in Nottinghamshire. Jobs in Rolleston are booked in like any other job: a fixed price from your photos, then a visit to do the work. Rolleston is one of 329 towns and villages in Nottinghamshire where we work. Our jobs stretch from Rolleston to Leeds (about 58 miles away).
Our visits in NG23 are booked in the same way as anywhere else. Local streets include Station Road, Corner Farm Close and Holly Court, all of which we cover. If you are just outside Rolleston, we cover Staythorpe (1 mile north-east), Averham (2 miles north-east), Farndon (2 miles east), East Stoke (2 miles south) and Thorpe (2 miles south-east). Further out, we also cover Mansfield (14 miles north-west), Carlton (11 miles south-west), Hucknall (13 miles west), Newark-on-Trent (4 miles east), West Bridgford (14 miles south-west) and Mansfield Woodhouse (14 miles north-west).
Local landmarks in Rolleston
Our clients here include homes close to Holy Trinity Church, among other places. Rolleston has its own railway station: Rolleston station. Further afield, we also cover the area around Newark Castle (3.4 miles east) and Newark Hospital (3.5 miles east).
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
What we cannot put right
To be straight with you, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Repairing versus replacing in Rolleston
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Same prices wherever you are
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
Read our full price list and resurfacing vs replacement cost guide.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Never use suction bath mats
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
