Warwickshire · England
Bath Re-enamelling in Avon Dassett
Full bath re-enamelling and resurfacing for homes and businesses in Avon Dassett and across Warwickshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Avon Dassett
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for staining under the taps and around the waste and a dull, rough surface that won’t come clean, in cast iron baths, acrylic baths and pressed steel baths.
All our work is covered by our one-year guarantee, wherever you are in Warwickshire.
- Area
- Avon Dassett (CV47)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Avon Dassett. The price reflects:
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether we combine several jobs
- What the surface is made of
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- A picture taken from further back
- Where you are, by postcode
- Details of any past repairs
- Any details about the material
Email us pictures of the damage and one of the entire item, and tell us you are in Avon Dassett, and we’ll come back with a fixed quote.
The process
We work cleanly and quietly. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
How to prepare
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Common problems we fix in Avon Dassett
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we are called about are:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
- Worn patches where water runs and sits
Questions to ask before booking
- Who turns up on the day
- How long the guarantee is and what it covers
- How the room is protected while they work
- Whether the colour is mixed to match
What a repair can’t fix
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Avon Dassett
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
FAQs for Avon Dassett
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Nearby places to Avon Dassett
What else we do in Avon Dassett
Avon Dassett and the surrounding area
Avon Dassett is about 6 miles north-west of Banbury, in Warwickshire. Jobs in Avon Dassett are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover 324 places across Warwickshire. We work right across the region, from Avon Dassett to Birmingham (about 30 miles away).
Every address in CV47 is covered. Other places close to Avon Dassett include Warmington (1 mile south), Northend (2 miles north-west), Temple Herdewyke (2 miles north-west), Ratley (2 miles south-west) and Radway (3 miles south-west). Further out, we also cover Warwick (12 miles north-west), Royal Leamington Spa (11 miles north-west), Stratford-upon-Avon (14 miles west), Leamington Spa (11 miles north-west), Kenilworth (15 miles north-west) and Southam (7 miles north).
Around Avon Dassett
Locally, our jobs take us to homes close to St John the Baptist's Church. Nearby you will also find Bygones Museum (3 miles east) and Hanwell Castle (4.3 miles south). Open spaces near Avon Dassett include Edge Hill.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- Repair dripping taps early
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Landlord and trade work in Avon Dassett
We carry out planned and one-off repairs for housing associations and facilities teams in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
