Warwickshire · England

Bath re-enamelling & resurfacing in Warwick, Warwickshire

Bath re-enamelling in Warwick without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Warwick

How we handle bath re-enamelling in Warwick

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Typical jobs include several chips and rust patches and a peeling or bubbling previous coating, in basins & shower trays, pressed steel baths and acrylic baths.

Every repair is covered by our one-year guarantee.

Where
Warwick (CV34, CV33, CV8, CV35)
Area hub
Warwickshire
Guarantee
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

How we price bath re-enamelling

Resurfacing from £350. We give every job a fixed price from photos. These are the things that affect it:

  • The colour and finish to match
  • How many areas need work
  • Doing more than one item at once
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • A coin or ruler next to the damage for scale

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Honest limits

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A cast iron or steel bath that is cracked right through
  • Acrylic that moves when you stand in it
  • Anything hidden under an old coating, until we remove it

Send us photos and we’ll tell you honestly.

Materials we repair

  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays

Do you need bath re-enamelling in Warwick?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

If you can see any of these, send us a photo:

  • An outdated colour you’d like to change
  • A coating lifting around the plughole
  • Staining under the taps and around the waste
  • Wear marks under the taps

Comparing quotes

  • Whether they match the colour on site
  • How long it needs to cure
  • Who will actually do the work
  • What prep work is covered

Our hiring checklist

Aftercare tips

Looking after the surface is easy:

  • Wipe the bath dry after use in hard water areas
  • A dripping tap should be fixed promptly
  • Do not let dyes or oils sit on the finish
  • Respect the curing time we give you

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

Warwick: your questions answered

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Can a failed resurfacing be redone?

Yes. Removing the old finish takes extra time, which we include in the price.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Warwick and nearby

Warwick is about 10 miles south of Coventry, in Warwickshire. We travel to clients in Warwick and nearby villages, so nothing has to leave your home. We cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 19 miles away.

Every address in CV34, CV33, CV8 and CV35 is covered. We regularly work on streets such as Station Road, High Street and Market Place and the roads around them. Main roads around Warwick include the A46 and A425, so getting to you is simple. Nearby, we also work in Emscote (1 mile north), Leamington Spa (2 miles north-east), Royal Leamington Spa (2 miles east), Whitnash (2 miles south-east) and Bishop's Tachbrook (2 miles south-east). We also work in nearby towns such as Rugby (15 miles north-east), Stratford-upon-Avon (8 miles south-west), Bedworth (14 miles north), Kenilworth (4 miles north), Southam (8 miles east) and Alcester (13 miles west). Warwick is among the bigger towns we cover in Warwickshire.

What’s near Warwick

Typical jobs here are in homes near Church of Saint Nicholas, Coten End Primary School and The Millwrights Arms Public House, among other places. Other local landmarks include Myton School (within half a mile east), St. Nicholas' Park (within half a mile north-west) and Ridgeway School (1 mile north-west). For rail, the closest station is Warwick station, about 0.5 miles north-west of the centre. Further afield, we also cover the area around Warwick Doll Museum (0.5 miles west) and Warwick Castle (less than half a mile west). Not far away are Oxpen Meadow Lake.

Map of Warwick © OpenStreetMap contributors

Landlords, agents and businesses in Warwick

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Landlords, letting agents and housing providers in Warwick use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

How it works

There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, tidy-up included.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s normally ready the day after.

How to prepare

  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit
  • Ensure the room can be ventilated

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.