Herefordshire · England
Bath Re-enamelling in Aylestone Hill
We travel to Aylestone Hill for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Do you need bath re-enamelling in Aylestone Hill?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Keep an eye out for these signs:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- Several chips and rust patches
- A bath in a colour that no longer suits
Before booking anyone
- Who turns up on the day
- How changes to the job are handled
- How long the guarantee is and what it covers
- What aftercare is recommended
How we handle bath re-enamelling in Aylestone Hill
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a roll-top that’s seen better days and lots of chips and rust spots, we can usually put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Aylestone Hill (HR1, HR4, HR2)
- Area hub
- Herefordshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Looking after it afterwards
Nothing complicated is needed:
- Respect the curing time we give you
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
- Let us know if it has been repaired before
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
Send us pictures and we will tell you honestly before booking.
Materials we work on in Aylestone Hill
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Aylestone Hill. The price depends on:
- How hard the colour is to match
- How much damage there is
- Previous DIY repairs that have to come out
- How many items we do on one visit
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- One picture of the entire bath
- The material, if you know it
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Landlord and trade work in Aylestone Hill
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Aylestone Hill, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Towns and villages near Aylestone Hill
Other services in Aylestone Hill
FAQs for Aylestone Hill
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Repair or replace in Aylestone Hill?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- No extra charge for your area
- One-year guarantee on every repair
Take a look at our prices page and bath cost comparison.
Where we work around Aylestone Hill
Aylestone Hill is about 1 mile north-east of Hereford, in Herefordshire. Anywhere in HR1, a technician comes to you. Aylestone Hill is one of 255 places in Herefordshire we cover. You can also see our page for Birmingham, about 44 miles away.
We work across the HR1, HR4 and HR2 postcode area. From Link Road, Folly Lane and Hopton Road or anywhere nearby, a technician can come to you. Nearby, we also work in Tupsley (1 mile south-east), Eign Hill (1 mile south), Lugwardine (2 miles east), Tidnor (2 miles east) and Bartestree (2 miles east). We also work in nearby towns such as Ross-on-Wye (12 miles south-east), Ledbury (12 miles east), Leominster (11 miles north), Merrivale (12 miles south-east), Bromyard (12 miles north-east) and Colwall Stone (14 miles east).
Near you in Aylestone Hill
Our customers here include homes close to The Commercial pub, Hereford Sixth Form College and Herefordshire College of Technology, among other places. Other local landmarks include Broadlands Primary School (less than half a mile south-east) and St Barnabas Church (under half a mile west). Aylestone Hill’s nearest station is Hereford station, roughly 0.5 miles south-west. A little further out are Hereford Castle (1.1 miles south-west) and Churchill House Museum & Hatton Gallery (within half a mile west). The countryside around Aylestone Hill includes Lugg Meadow and Dinedor Hill.
About our accreditations · Every repair comes with a one-year guarantee.
