Herefordshire · England
Bath Re-enamelling in Colwall Stone
Local bath re-enamelling for Colwall Stone: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coloured bath you want in white
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Getting a price
To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.
Read more
Bath re-enamelling in Colwall Stone without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with chips and rust in more than one place and stains that won’t shift, we can generally put it right.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Colwall Stone (WR13)
- Area hub
- Herefordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Colwall Stone
Resurfacing from £350. There is no charge for travel to Colwall Stone. The price comes down to:
- How much damage there is
- What kind of damage it is
- The material and finish
- How easy the damage is to reach
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
If you are in Colwall Stone and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Also near Colwall Stone
Also in Colwall Stone
When to call us in Colwall Stone
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
What your quote should include
- What prep work is covered
- When it can be used again
- Who will actually do the work
- What protection goes down before work starts
Honest limits
Some jobs aren’t right for a repair, for example:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Where we work around Colwall Stone
Colwall Stone is about 3 miles south-west of Great Malvern, in Herefordshire. From the centre of Colwall Stone to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover 255 places across Herefordshire. Our nearest city page is Birmingham, about 33 miles away.
Postcode districts we cover here: WR13. You’ll find streets such as Old Church Road, Stone Close and Stone Drive. With the B4218 close by, Colwall Stone is simple for us to get to. Other places close to Colwall Stone include Evendine (1 mile south), Colwall Green (1 mile south), Upper Colwall (1 mile north-east), Malvern Wells (1 mile east) and Wyche (1 mile north-east). Larger places within reach include Hereford (15 miles west), Ross-on-Wye (15 miles south-west), Ledbury (4 miles south-west), Merrivale (15 miles south-west), Eign Hill (14 miles west) and Widemarsh (15 miles west).
Around Colwall Stone
Locally, our jobs take us to homes close to Colwall Park Hotel, Church of the Good Shepherd and Colwall CofE Primary School, among other places. There is a railway station in Colwall Stone itself: Colwall station. A little further out are British Camp (1.7 miles south) and Malvern Museum of Local History (2.4 miles north-east). For a walk, there is Hollybed Farm Meadows and Jubilee Hill.
For landlords and businesses
We work for landlords, letting agents and housing providers in Colwall Stone as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
Once the work has cured, treat it gently:
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Colwall Stone
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
