Wirral · England
Bath re-enamelling & resurfacing in Birkenhead, Wirral
Our technicians come to Birkenhead for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that will not come clean
Bath re-enamelling in Birkenhead without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and people most frequently call us about several chips and rust patches and a bath that stays dull however much you clean it.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Ask for a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Signs you need bath re-enamelling in Birkenhead
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Stains that will not shift
- An old resurfacing that is failing
Before booking anyone
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
- What aftercare is recommended
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Birkenhead. The price comes down to:
- The colour and finish to match
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any details about the material
- A photo taken from further back
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
How to care for the repair
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Your questions about bath re-enamelling in Birkenhead
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
What information do you need?
Use the quote form or ring 0345 017 0787.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.
Covering Birkenhead
Birkenhead is about 5 miles west of Liverpool, in Wirral. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 44 places across Wirral.
Here we cover the CH43, CH42, CH41 and CH49 postcode area. You will find streets such as Church Road, St Werburgh's Square and King's Square, all of which we cover. Main roads around Birkenhead include the A41 and A551, so getting to you is simple. If you are just outside Birkenhead, we cover Claughton (1 mile north-west), Tranmere (1 mile east), Noctorum (1 mile west), Woodside (2 miles north-east) and Woodchurch (2 miles west). Larger places within reach include Bebington (4 miles south-east), Heswall (4 miles south-west), Moreton (3 miles north-west), West Kirby (5 miles west), Bromborough (4 miles south-east) and Greasby (3 miles west). Birkenhead is among the bigger towns we cover in Wirral.
Local landmarks in Birkenhead
Typical jobs here are in homes near Caernarvon Castle pub, Oxton St Saviour's CofE Aided Primary School and Birkenhead High School Academy and the streets around them. You will also find Dock Branch Park (1.3 miles north-east), St Saviour's Church (within half a mile west) and Laird School of Art (1 mile north-east). Birkenhead’s nearest station is Birkenhead Park station, roughly 1 mile north. A little further out are Liverpool One (2.9 miles north-east) and St Catherine's Hospital (0.7 miles east). For a walk, there’s Bidston Hill and New Ferry Butterfly Park.
- Other local spots include St. Peter's (2.6 miles north-east)
Nearby places to Birkenhead
Also in Birkenhead
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Landlord and trade work in Birkenhead
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
