Gloucestershire · England
Bath re-enamelling & resurfacing in Bagendon, Gloucestershire
Bath re-enamelling in Bagendon without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow the best part of a day from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Bath re-enamelling in Bagendon without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s stains that won’t shift and a roll-top that’s seen better days, we can help.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Bagendon (GL7)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Bagendon
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send pictures.
Are there extra charges for Bagendon?
Travel is included in the price, and we charge the same wherever you are.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- No need to remove anything
- Every repair guaranteed for a year
Read our pricing and resurfacing vs replacement cost guide.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Bagendon
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What we are called out for in Bagendon
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is normally perfectly sound.
If you can see any of these, send us a photo:
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- Worn patches where water runs and sits
What to look for in a quote
- Who turns up on the day
- What prep work is covered
- How changes to the job are handled
- A fixed quote, and whether VAT is included
Keeping it looking good
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- The size and number of damaged areas
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Make sure they show:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- One sharp close-up of the damage
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Towns and villages near Bagendon
More services for Bagendon
Bagendon and the surrounding area
Bagendon is about 3 miles north of Cirencester, in Gloucestershire. We visit homes and businesses in Bagendon, so nothing has to leave your home. Bagendon is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Bagendon to Birmingham (about 50 miles away).
Here we cover the GL7 postcode area. You’ll find streets such as Cutham Lane, Welsh Way and Churn Valley View. We also travel to Perrott's Brook (1 mile north-east), Stratton (1 mile south), Baunton (1 mile south-east), North Cerney (2 miles north) and Cirencester (3 miles south). Within a short drive, we also cover Cheltenham (11 miles north-west), Gloucester (13 miles north-west), Stroud (11 miles west), St Paul's (11 miles north), Lansdown (11 miles north) and Bishop's Cleeve (14 miles north).
Near you in Bagendon
In Bagendon, that means homes near The Bear pub, Stratton Church of England Primary School and Church of St Margaret, among other places. Other landmarks nearby include Cirencester Castle (2.4 miles south) and Cirencester Hospital (2.6 miles south). The countryside around Bagendon includes Cotswolds.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
