Argyll and Bute · Scotland

Bath Re-enamelling for Balemartine homes

Fixed-price bath re-enamelling in Balemartine and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Balemartine?

Looking after it afterwards

Nothing complicated is needed:

  • Do not leave a chip unrepaired
  • Leave the bath for the full curing time before using it
  • A dripping tap should be fixed promptly
  • Do not leave bottles, razors or sponges standing on the surface

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Bath re-enamelling in Balemartine without replacing anything

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and common reasons people contact us are stains that won’t shift and enamel that’s lost its shine and feels rough.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Stained basin resurfaced to clean white (before and after)
Location
Balemartine (PA77)
County
Argyll and Bute
Cover
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Prices start from £350. We price every job individually. The main factors are:

  • The type of damage
  • How many items we do on one visit
  • The colour and finish to match
  • Any earlier repairs that need removing first

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what we need:

  • Natural light rather than flash
  • Something in shot to show the size
  • One picture of the whole bath
  • Any earlier repairs or coatings

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Balemartine and nearby

Balemartine is in Argyll and Bute. We visit clients in Balemartine and the surrounding area, so you do not need to take anything anywhere. Balemartine is one of 118 towns and villages in Argyll and Bute where we work.

Here we cover the PA77 postcode area. Being close to the B8066, Balemartine is simple for us to get to. Neighbouring places we cover include Balephuil (1 mile west), Crossapol (2 miles north-east), Scarinish (5 miles north-east), Arinagour (18 miles north-east) and Baile Mòr (21 miles south-east). For island and remote addresses, ring us first and we will plan the trip.

Landmarks near Balemartine

Further afield, we also cover the area around Skerryvore Lighthouse Museum (1.3 miles south). Not far away are Ben Hynish and Loch Gàrradh a' Chapaill.

Map of Balemartine © OpenStreetMap contributors

How the visit works

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Keep a parking space free if you can
  • Clear the area around the damage
  • Let us know if it has been repaired before

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a free quote

Read more

Honest limits

To be straight with you, some problems need a different fix:

  • A cast iron or steel bath that is cracked right through
  • Plumbing leaks, which need a plumber
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays

Do you need bath re-enamelling in Balemartine?

Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.

It’s worth getting a quote if you see:

  • An original cast iron bath that needs restoring
  • An old resurfacing that is failing
  • Lots of chips and rust spots
  • Staining under the taps and around the waste

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • How long the guarantee is and what it covers
  • How the room is protected while they work
  • Whether the price is fixed and includes VAT

How to compare quotes

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • A year’s guarantee on all work
  • We will tell you if it’s not worth repairing
  • CHAS and Constructionline accredited
  • One price list for the whole UK

See our pricing and resurfacing vs replacement cost guide.

Your questions about bath re-enamelling in Balemartine

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you change the colour of my bath?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

How long is the bath unusable?

One day for most baths and can be used the day after. We’ll confirm timings when we quote.

What if the damage is worse than the photos show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.