Coventry · England
Bath re-enamelling & resurfacing in Ball Hill, Coventry
Full bath re-enamelling and resurfacing in Ball Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Bath re-enamelling in Ball Hill, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Typical jobs include staining under the taps and around the waste and enamel that’s lost its shine and feels rough, across cast iron baths, pressed steel baths and Victorian roll-tops.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Ball Hill (CV2, CV1, CV3)
- County
- Coventry
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Ball Hill?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we are called about are:
- A roll-top that is seen better days
- Thin, worn enamel in places
- A coloured bath you want in white
- Staining under the taps and around the waste
What to look for in a quote
- What preparation is included
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- When it can be used again
Ball Hill and the surrounding area
Ball Hill is about 1 mile east of Coventry, in Coventry. Our repair technicians come to customers in Ball Hill, so nothing has to leave your home. We work in all 88 towns and villages across Coventry. You can also see our page for Birmingham, about 18 miles away.
Here we cover the CV2, CV1 and CV3 postcode area. Local streets include Swan Lane, Hugh Road and Dane Road, and we cover them all. With the A444 close by, Ball Hill is simple for us to get to. We also cover the places around Ball Hill: Upper Stoke (1 mile north-east), Hillfields (1 mile west), Wyken (1 mile north-east), Stoke Heath (1 mile north) and Stoke (1 mile south-east). Larger places within reach include Balsall Common (7 miles west), Longford (3 miles north), Allesley Green (4 miles west), Whitmore Park (3 miles north-west), Whoberley (3 miles west) and Eastern Green (4 miles west). Being one of Coventry’s larger places, Ball Hill is somewhere we visit often.
Local landmarks in Ball Hill
We visit homes around Ruined Cathedral Church of St Michael, The Biggin Hall pub and Pattison College, among other places. You’ll also find Sacred Heart Catholic Primary School (less than half a mile south-east), Saint Margaret's (under half a mile south-west) and Stoke Park School (under half a mile north-east). The closest station to Ball Hill is Coventry station, about 1.5 miles south-west of the centre. Well-known places in the area include Coventry Castle (1.1 miles west) and Coventry and Warwickshire Hospital (1.1 miles west). Open spaces near Ball Hill include Brandon Marsh.
FAQs for Ball Hill
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. You are under no obligation.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Respect the curing time we give you
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Towns and villages near Ball Hill
Other services in Ball Hill
What affects the price in Ball Hill
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Where the damage is and how we get to it
- How much damage there is
- What kind of damage it is
- The material and finish
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can normally get a fixed price without us visiting. To make it quick:
- A clear, close picture of the problem area
- One picture of the entire bath
- What it’s made of, if you know
- Something in shot to show the size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How it works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Open a window if you can
- Tell us about parking, stairs or access
Ask for a price
If you are in Ball Hill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we cannot put right
It helps to know what we cannot do too:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
