Coventry · England
Bath re-enamelling & resurfacing in Stoke, Coventry
Damaged bath in Stoke? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our bath re-enamelling in Stoke
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We are frequently asked to fix an original cast iron bath that needs restoring and several chips and rust patches, in acrylic baths, basins & shower trays and pressed steel baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Stoke (CV3, CV2)
- County
- Coventry
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The material
- Access to the area
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Where you are, by postcode
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Questions from Stoke
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Common problems we fix in Stoke
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Questions to ask before you book
- What happens if they find more damage
- Who will actually do the work
- When it can be used again
- Is the price fixed, and does it include VAT?
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
When a repair is not the answer
A repair isn’t right for every job, for example:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why book with us
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- One price list for the whole UK
Read our prices page and bath cost comparison.
How to care for the repair
Looking after the surface is easy:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Stoke
Other services in Stoke
Our work in Stoke
Stoke is about 2 miles east of Coventry, in Coventry. We travel to clients in Stoke and the surrounding area, so you don’t need to take anything anywhere. Stoke is one of 88 towns and villages in Coventry where we work. We work right across the region, from Stoke to Birmingham (about 19 miles away).
We cover every part of CV3 and CV2 and the streets around it. We regularly work on streets such as Omar Road, Grant Road and Keats Road. You’ll find Stoke on the A428, which makes it straightforward to reach. Neighbouring places we cover include Wyken (1 mile north), Ball Hill (1 mile north-west), Upper Stoke (1 mile north-west), Walsgrave on Sowe (1 mile north-east) and Stoke Heath (2 miles north-west). We also work in nearby towns such as Earlsdon (3 miles west), Daimler Green (3 miles north-west), Alderman's Green (3 miles north), Coundon (3 miles west), Balsall Common (8 miles west) and Little Heath (3 miles north-west).
What’s near Stoke
We visit homes around The Biggin Hall pub, St Bartholomew's Church and Pattison College and the streets around them. You’ll also find Richard Lee Primary School (less than half a mile north-east) and Ernesford Grange School & Community College (0.7 miles south). The nearest railway station is Coventry station, about 2.3 miles west of the centre. Well-known places in the area include Arena Park Shopping Centre (3 miles north-west) and Caludon Castle (1 mile north). Green spaces nearby include Brandon Marsh.
About our accreditations · Every repair comes with a one-year guarantee.
