Coventry · England
Bath re-enamelling & resurfacing in Wyken, Coventry
Bath re-enamelling in Wyken without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
Bath re-enamelling at your home in Wyken
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re frequently asked to fix a coating lifting around the plughole and staining under the taps and around the waste, on acrylic baths, cast iron baths and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Wyken (CV2, CV3, CV6)
- Region
- Coventry
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What we can’t put right
Before booking, it’s worth knowing the limits:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Our work in Wyken
Wyken is about 2 miles east of Coventry, in Coventry. Jobs in Wyken are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in 88 places across Coventry. You can also see our page for Birmingham, about 18 miles away.
We cover every part of CV2, CV3 and CV6. Whether you live on Dane Road, Wyke Road and Kare Road or a nearby road, a technician can come to you. With the A4600 close by, Wyken is simple for us to get to. We also cover the places around Wyken: Upper Stoke (1 mile north-west), Stoke Heath (1 mile north-west), Ball Hill (1 mile south-west), Stoke (1 mile south) and Henley Green (1 mile north). Larger places within reach include Earlsdon (3 miles south-west), Coundon (3 miles west), Balsall Common (8 miles west), Holbrooks (3 miles north-west), Chapelfields (3 miles west) and Longford (3 miles north).
Local landmarks in Wyken
In Wyken, that means homes near Pattison College, The Biggin Hall pub and St John Fisher Catholic Primary School. You will also find Church of St Michael (0.5 miles south-west) and Stoke Park School (within half a mile south-west). The closest station to Wyken is Coventry station, roughly 2.3 miles south-west of the centre. Further afield, we also cover the area around Caludon Castle (0.6 miles east) and University Hospital Coventry (1.3 miles east). The countryside around Wyken includes Brandon Marsh.
Nearby places to Wyken
More services for Wyken
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Honest advice, even when it means no job
- One-year guarantee on every repair
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or bath cost comparison.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Wyken. What changes the price is:
- Where the damage is and how we get to it
- The material and finish
- What kind of damage it is
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed price
You can usually get a fixed quote without us visiting. To make it quick:
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- What it’s made of, if you know
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Do you need bath re-enamelling in Wyken?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- How long it needs to cure
- How to look after the finish
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
Your questions about bath re-enamelling in Wyken
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Coventry.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
About our accreditations · Every repair comes with a one-year guarantee.
