Argyll and Bute · Scotland

Bath Re-enamelling for Balliveolan homes

We travel to Balliveolan for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Balliveolan

About our bath re-enamelling in Balliveolan

Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a bath that stays dull however much you clean it and a coloured bath you want in white, in cast iron baths, basins & shower trays and acrylic baths.

All of our repairs are guaranteed for twelve months in Balliveolan and everywhere else. If something goes wrong with the work, we come back.

Area
Balliveolan (PA34)
County
Argyll and Bute
Cover
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

How the visit works

We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Advice

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Plumbing leaks, which need a plumber
  • A bath split right through the body
  • Holes rusted through the metal

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

Do you need bath re-enamelling in Balliveolan?

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

People typically call us when they notice something like this:

  • A coloured bath you want in white
  • Chips and rust in more than one place
  • Worn patches where water runs and sits
  • A coating lifting around the plughole

Comparing quotes

  • How your room will be protected
  • What the guarantee covers, and for how long
  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel

Our hiring checklist

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Leave the bath for the full curing time before using it
  • Wipe the bath dry after use in hard water areas
  • Do not leave a chip unrepaired
  • Keep toiletries on a shelf rather than in the bath

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Questions from Balliveolan

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Are there extra charges for Balliveolan?

We don’t add a call-out fee. The fixed price covers the visit and the work.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first.

Which areas do you work in?

The entire UK, including all of Argyll and Bute. Send your postcode with your photos and we’ll confirm dates.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do you resurface freestanding baths?

Yes, often. We resurface the inside, and the outside can be refinished too.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What affects the price in Balliveolan

Prices start from £350. You will know the full cost before you book. We take into account:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • The colour and finish to match
  • How easy the damage is to reach

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • One sharp close-up of the damage

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.

Repairing versus replacing in Balliveolan

A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Why book with us

  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • Technicians who travel to you, UK-wide
  • Everything repaired in place

Take a look at our full price list or resurfacing vs replacement cost guide.

Where we work around Balliveolan

Balliveolan is in Argyll and Bute. Wherever you are in the PA34 postcode area, we come to you. Balliveolan is one of 118 towns and villages in Argyll and Bute we cover. You can also see our page for Glasgow, about 66 miles away.

All of PA34 is within our area, from the main roads to the quietest streets. Balliveolan is on the B8045, so it’s easy for us to reach. If you’re just outside Balliveolan, we cover Achnacroish (1 mile south), Port Appin (4 miles north-east), Benderloch (4 miles south-east), Dunbeg (6 miles south) and North Connel (6 miles south-east). For island and remote addresses, ring us first and we will plan the trip.

What’s near Balliveolan

Further afield, we also cover the area around Coeffin (0.9 miles north) and Lismore Gaelic Heritage Centre (under half a mile north-east). Not far away are Barr Mòr and Lochan Dubh.

Map of Balliveolan © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.