Wigan · England
Bath re-enamelling & resurfacing in Bamfurlong, Wigan
Bath re-enamelling for Bamfurlong, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- An outdated colour you’d like to change

How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Getting a price
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Bath re-enamelling in Bamfurlong, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s chips and rust in more than one place and stains that won’t shift, we can help, whatever the material.
Every repair comes with a one-year guarantee, wherever you are in Wigan.
- Where
- Bamfurlong (WN2)
- Region
- Wigan
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Repairing versus replacing in Bamfurlong
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- We leave the room as we found it
- One price list for the whole UK
- Most jobs done in one visit
- Nothing taken out or refitted
See our full price list or bath cost comparison.
What affects the price in Bamfurlong
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How many areas need work
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Details of any past repairs
- The material, if you know it
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
When a repair is not the answer
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Bamfurlong and nearby
Bamfurlong is about 2 miles north-east of Ashton-in-Makerfield, in Wigan. Wherever you are in the WN2 postcode area, a technician comes to you. Bamfurlong is one of 63 places in Wigan we cover. Our nearest city page is Liverpool, about 15 miles away.
Postcode districts we cover here: WN2. Local streets include Dorothy Walk, Lily Lane and Winstanley Road, all of which we cover. We also travel to Bryn Gates (1 mile south-west), Platt Bridge (1 mile north), Land Gate (2 miles west), Ince-in-Makerfield (2 miles north) and Poolstock (2 miles north-west). We also work in nearby towns such as Wigan (3 miles north-west), Leigh (4 miles east), Atherton (5 miles east), Standish (6 miles north), Scholes (3 miles north) and Orrell (4 miles north-west).
Landmarks near Bamfurlong
In Bamfurlong, that means homes near Church Of The Good Shepherd, Bryn Hall pub and Abram Bryn Gates Primary School and the streets around them. Nearby too are Abram Park (0.7 miles east) and Newbridge Learning Community (1 mile north). Bamfurlong’s nearest station is Bryn station, roughly 1.8 miles south-west. Other landmarks nearby include Golborne and Lowton West (2.1 miles south) and Marketgate Shopping Centre (2.7 miles north-west). Not far away are Pennington Flash and Highfield Moss.
For landlords and businesses
We work for landlords, letting agents and housing providers in Bamfurlong as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Towns and villages near Bamfurlong
What else we do in Bamfurlong
FAQs for Bamfurlong
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are there extra charges for Bamfurlong?
We do not add a call-out fee. Your fixed price includes everything.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.

