Wigan · England
Bath re-enamelling & resurfacing in Land Gate, Wigan
Bath re-enamelling in Land Gate without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- A bath in a colour that no longer suits
Where we work around Land Gate
Land Gate is about 1 mile north of Ashton-in-Makerfield, in Wigan. Across the WN4 area, a technician comes to you. We cover 63 places in Wigan. Our jobs stretch from Land Gate to Liverpool (about 13 miles away).
Postcode districts we cover here: WN4. Whether you live on Patterdale Road, Yewdale Road and Dovedale Road or a nearby road, we can come to you. If you are just outside Land Gate, we cover Goose Green (1 mile north), Bryn Gates (1 mile east), Winstanley (2 miles north-west), Bamfurlong (2 miles east) and Windy Arbour (2 miles west). We also work in nearby towns such as Leigh (5 miles east), Hindley (4 miles north-east), Atherton (7 miles east), Ince-in-Makerfield (3 miles north-east), Standish (5 miles north) and Scholes (3 miles north-east).
Near you in Land Gate
Our customers here include homes close to Three Sisters Recreation Area, St Peter and Bryn St Peter's CofE Primary School, among other places. The closest station to Land Gate is Bryn station, roughly 0.6 miles south. Well-known places in the area include Bryn (1 mile south) and Marketgate Shopping Centre (2.7 miles north). Not far away are Pennington Flash and Billinge Hill.
How we handle bath re-enamelling in Land Gate
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, and can be used again the next day. Typical jobs include thin, worn enamel in places and a peeling or bubbling previous coating, on Victorian roll-tops, cast iron baths and acrylic baths.
All of our repairs are guaranteed for twelve months in Land Gate and everywhere else. If something goes wrong with the work, we come back.
- Where
- Land Gate (WN4)
- Area hub
- Wigan
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Any earlier repairs that need removing first
- Doing more than one item at once
- The material
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- A photo taken from further back
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why choose Surface Doctor in Land Gate
- Generally one visit, start to finish
- Work done at your home or business
- Rooms protected and left tidy
- One price list for the entire UK
See our prices page or bath cost comparison.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When to call us in Land Gate
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
Questions to ask before you book
- How the colour is matched
- What prep work is covered
- How to care for the finish
- A fixed price, and whether VAT is included
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Honest limits
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
FAQs for Land Gate
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How much does bath re-enamelling cost in Land Gate?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What happens after I send photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Towns and villages near Land Gate
Other services in Land Gate
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
