Cumbria · England
Bath re-enamelling & resurfacing in Bampton, Cumbria
Bath re-enamelling in and around Bampton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Bampton
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a period or roll-top bath worth keeping and a peeling or bubbling previous coating, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Where
- Bampton (CA10)
- Region
- Cumbria
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Bampton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Chips and rust in more than one place
- An old resurfacing that’s failing
Comparing quotes
- The length of the guarantee and what it covers
- How the colour is matched
- How soon you can use it again
- How the room is protected while they work
How to look after the repair
Nothing complicated is needed:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Bampton questions
How do I book?
Use the quote form or ring 0345 017 0787.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Honest limits
Some jobs are not right for a repair, including:
- A bath that’s rusted through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Bampton
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- The material
- The colour and finish to match
- Previous DIY repairs that have to come out
- How many areas need work
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any earlier repairs or coatings
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A photo taken from further back
For a price in Bampton, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We charge the same wherever you are, with no extra for Bampton. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Colours mixed by hand to suit your surface
- One price list for the whole UK
- No need to remove anything
- Most jobs done in one visit
See our prices page or resurfacing vs replacement cost guide.
Places near Bampton
Other services in Bampton
Work for landlords and builders
Landlords, letting agents and housing providers in Bampton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About Bampton
Bampton is about 7 miles south of Penrith, in Cumbria. Across the CA10 area, we come to you. Bampton is one of 438 places in Cumbria where we work. We work right across the region, from Bampton to Newcastle upon Tyne (about 54 miles away).
Jobs in CA10 work the same way as everywhere else we cover. Neighbouring places we cover include Bampton Grange (1 mile east), Thrimby (2 miles north-east), Askham (3 miles north), Hackthorpe (3 miles north-east) and Shap (4 miles south-east). We also work in nearby towns such as Penrith (7 miles north), Windermere (14 miles south-west), Appleby-in-Westmorland (11 miles east), Fair Hill (8 miles north), Ambleside (12 miles south-west) and Bowness-on-Windermere (15 miles south-west).
Around Bampton
We visit homes around Church of St Patrick. Nearby you will also find Lowther Castle (3.4 miles north). Open spaces near Bampton include Littlewater Tarn and Heughscar Hill.
About our accreditations · Every repair comes with a one-year guarantee.
