Edinburgh · Scotland
Bath re-enamelling & resurfacing in Barnton, Edinburgh
Bath re-enamelling in and around Barnton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
About our bath re-enamelling in Barnton
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include a peeling or bubbling previous coating and lots of chips and rust spots, across acrylic baths, cast iron baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Barnton (EH4, EH12)
- County
- Edinburgh
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a full day.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Barnton: your questions answered
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you cover the whole of Edinburgh?
Across the UK. Prices do not change with location.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Barnton.
More services for Barnton
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- Doing more than one item at once
- What the surface is made of
- How much damage there is
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- Details of any past repairs
- A close-up of the damage, in focus
- One picture of the entire bath
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say straight away whether it can be repaired.
Repairing versus replacing in Barnton
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Barnton
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
See our full price list and resurfacing vs replacement cost guide.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we are called out for in Barnton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
What your quote should include
- How your room will be protected
- How to look after the finish
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
Looking after it afterwards
So the finish stays in good condition:
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Our work in Barnton
Barnton is about 4 miles west of Edinburgh, in Edinburgh. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Barnton is one of 175 towns and villages in Edinburgh we cover.
Every address in EH4 and EH12 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Avon Road, Cammo Road and Essex Road and the roads around them. Nearby, we also work in Braepark (1 mile north), Cammo (1 mile south-west), Cramond (1 mile north-east), Bughtlin (1 mile south) and East Craigs (1 mile south). Further out, we also cover Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (5 miles east), Broughton (5 miles east) and Bellevue (4 miles east).
Local landmarks in Barnton
Typical jobs here are in homes near Edinburgh and Craigmount High School and the streets around them. Barnton’s nearest station is Edinburgh Gateway station, roughly 1.6 miles south. A little further out are Corstorphine Hospital (1.9 miles south-east) and The Gyle Shopping Centre (1.7 miles south). For a walk, there’s The New Leaf Co-op and Corstorphine Hill.
About our accreditations · Every repair comes with a one-year guarantee.
