Edinburgh · Scotland
Bath Re-enamelling for Bellevue homes
Problem with your bath in Bellevue? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
Bath re-enamelling in Bellevue, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are several chips and rust patches and worn patches where water runs and sits.
Every job is backed for twelve months in Bellevue and everywhere else. We return to put right any problem with the work.
- Location
- Bellevue (EH7, EH3, EH2)
- Region
- Edinburgh
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Bellevue
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Signs it’s time to call us include:
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- A bath in a colour that no longer suits
What your quote should include
- How the colour is matched
- How long it needs to cure
- Whether the price is fixed and includes VAT
- Whether the price covers travel
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairing versus replacing in Bellevue
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Bellevue customers choose us
- Every repair guaranteed for a year
- One price list for the entire UK
- Colour mixed on the day to match
- Free fixed quotes from pictures
See our full price list or bath cost comparison.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Places near Bellevue
What else we do in Bellevue
Questions from Bellevue
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you work in Bellevue?
We do. Repair technicians travel to Bellevue from across the region, and the price is the same as everywhere else.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How do I get a price for bath re-enamelling in Bellevue?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Clear the area around the damage
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Read more
Keeping it looking good
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Bellevue as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Our work in Bellevue
Bellevue is about 1 mile north-east of Edinburgh, in Edinburgh. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover 175 places across Edinburgh.
Postcode districts we cover here: EH7, EH3 and EH2. Whether you live on York Lane, Meuse Lane and Canon Lane or a nearby road, we can come to you. With the A900 close by, Bellevue is simple for us to get to. We also cover the places around Bellevue: Broughton (1 mile south-east), Canonmills (1 mile north-west), Gayfield (1 mile east), New Town (1 mile south-west) and Greenside (1 mile south-east). Further out, we also cover Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (4 miles south), Gilmerton (5 miles south-east), Slateford (3 miles south-west) and Gracemount (4 miles south). Being one of Edinburgh’s larger places, Bellevue is somewhere we visit often.
Local landmarks in Bellevue
Around Bellevue, we work in homes near Drummond Community High School, St Cuthbert's Church and McDonald Road Library, among other places. Other local landmarks include London Street Primary School (within half a mile east), Public House (under half a mile south-east), King George V Park (within half a mile west) and Free Church College (0.7 miles south). The closest station to Bellevue is Edinburgh Waverley station, roughly 0.6 miles south. Further afield, we also cover the area around Edinburgh Castle (0.9 miles south) and Victorian Pharmacy Museum (under half a mile south-east). Not far away are Salisbury Crags and The New Leaf Co-op.
- Local churches include St Mary's Parish Church (less than half a mile south-west)
About our accreditations · Every repair comes with a one-year guarantee.
